Armv8.1-m: Add pacbti support (#1147)

* copyright-checker: Add FreeRTOS Arm collab copyright

FreeRTOS Arm collab files shall have both Amazon's
and Arm's copyright headers. Hence, the copyright
checker is modified to check for both copyrights.

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>

* armv8-m: Add support for IAR with TFM FREERTOS PORT

As the case for ARMClang, and GCC toolchains, IAR
with TFM FreeRTOS Port support is added.

Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>

* armv8-m: Do not overwrite Control register value

The current ARMv8-M FreeRTOS-Kernel Port code
implementation is modified in a way that allows
the CONTROL register's value to be retained
rather than being overwritten.

This is needed for adding PACBTI support as
the special-purpose CONTROL register `PAC_EN`,
`UPAC_EN`, `BTI_EN`, and `UBTI_EN` PACBTI
enablement bits should be configured before calling
`vRestoreContextOfFirstTask()` function which currently
overwrite the value inside the CONTROL register.

Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>

* armv8.1-m: Add PACBTI support to kernel non-secure implementation

In this commit, Pointer Authentication, and Branch Target
Identification Extension (PACBTI) support is added for
Non-Secure and Non-TrustZone variants of Cortex-M85
FreeRTOS-Kernel Port.

The PACBTI support is added for Arm Compiler For
Embedded, and IAR toolchains only. The support in
the kernel is not yet enabled for GNU toolchain
due to known issues.

Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>

* Fix CI check

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>

---------

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Signed-off-by: Ahmed Ismail <Ahmed.Ismail@arm.com>
Co-authored-by: Ahmed Ismail <ahmism01@e133373.arm.com>
Co-authored-by: Gaurav Aggarwal <aggarg@amazon.com>

Author: 3 people

.github/.cSpellWords.txt

@@ -448,6 +448,7 @@ MAINRDY
 MAIR
 Mang
 Mbits
+mbranch
 mcause
 MCFR
 MCKA
@@ -586,6 +587,8 @@ OWATCOM
 OWDR
 OWER
 OWSR
+pacbti
+PACBTI
 PAGEN
 PCDR
 PCER
@@ -900,6 +903,7 @@ TXTEN
 TXUBR
 TXVC
 TXVDIS
+UBTI
 UDCP
 UNACKED
 uncrustify
@@ -915,6 +919,7 @@ UNSUB
 UNSUBACK
 unsubscriptions
 unsuspended
+UPAC
 URAD
 URAT
 URSTEN

.github/scripts/kernel_checker.py

@@ -28,6 +28,7 @@
 # */
 
 import os
+import re
 from common.header_checker import HeaderChecker
 
 #--------------------------------------------------------------------------------------------------
@@ -106,6 +107,15 @@
     r'.*portable/GCC/AVR32_UC3/.*',
 ]
 
+KERNEL_ARM_COLLAB_FILES_PATTERNS = [
+    r'.*portable/ARMv8M/*',
+    r'.*portable/.*/ARM_CM23*',
+    r'.*portable/.*/ARM_CM33*',
+    r'.*portable/.*/ARM_CM35*',
+    r'.*portable/.*/ARM_CM55*',
+    r'.*portable/.*/ARM_CM85*',
+]
+
 KERNEL_HEADER = [
     '/*\n',
     ' * FreeRTOS Kernel <DEVELOPMENT BRANCH>\n',
@@ -139,19 +149,92 @@
 
 FREERTOS_COPYRIGHT_REGEX = r"^(;|#)?( *(\/\*|\*|#|\/\/))? Copyright \(C\) 20\d\d Amazon.com, Inc. or its affiliates. All Rights Reserved\.( \*\/)?$"
 
+FREERTOS_ARM_COLLAB_COPYRIGHT_REGEX = r"(^(;|#)?( *(\/\*|\*|#|\/\/))? Copyright \(C\) 20\d\d Amazon.com, Inc. or its affiliates. All Rights Reserved\.( \*\/)?$)|" + \
+                                      r"(^(;|#)?( *(\/\*|\*|#|\/\/))? Copyright 20\d\d Arm Limited and/or its affiliates( \*\/)?$)|" + \
+                                      r"(^(;|#)?( *(\/\*|\*|#|\/\/))? <open-source-office@arm.com>( \*\/)?$)"
+
+
+class KernelHeaderChecker(HeaderChecker):
+    def __init__(
+        self,
+        header,
+        padding=1000,
+        ignored_files=None,
+        ignored_ext=None,
+        ignored_patterns=None,
+        py_ext=None,
+        asm_ext=None,
+        third_party_patterns=None,
+        copyright_regex = None
+    ):
+        super().__init__(header, padding, ignored_files, ignored_ext, ignored_patterns,
+                         py_ext, asm_ext, third_party_patterns, copyright_regex)
+
+        self.armCollabRegex = re.compile(FREERTOS_ARM_COLLAB_COPYRIGHT_REGEX)
+
+        self.armCollabFilesPatternList = []
+        for pattern in KERNEL_ARM_COLLAB_FILES_PATTERNS:
+            self.armCollabFilesPatternList.append(re.compile(pattern))
+
+    def isArmCollabFile(self, path):
+        for pattern in self.armCollabFilesPatternList:
+            if pattern.match(path):
+                return True
+        return False
+
+    def checkArmCollabFile(self, path):
+        isValid = False
+        file_ext = os.path.splitext(path)[-1]
+
+        with open(path, encoding="utf-8", errors="ignore") as file:
+            chunk = file.read(len("".join(self.header)) + self.padding)
+            lines = [("%s\n" % line) for line in chunk.strip().splitlines()][
+                : len(self.header) + 2
+            ]
+            if (len(lines) > 0) and (lines[0].find("#!") == 0):
+                lines.remove(lines[0])
+
+        # Split lines in sections.
+        headers = dict()
+        headers["text"] = []
+        headers["copyright"] = []
+        headers["spdx"] = []
+        for line in lines:
+            if self.armCollabRegex.match(line):
+                headers["copyright"].append(line)
+            elif "SPDX-License-Identifier:" in line:
+                headers["spdx"].append(line)
+            else:
+                headers["text"].append(line)
+
+        text_equal = self.isValidHeaderSection(file_ext, "text", headers["text"])
+        spdx_equal = self.isValidHeaderSection(file_ext, "spdx", headers["spdx"])
+
+        if text_equal and spdx_equal and len(headers["copyright"]) == 3:
+            isValid = True
+
+        return isValid
+
+    def customCheck(self, path):
+        isValid = False
+        if self.isArmCollabFile(path):
+            isValid = self.checkArmCollabFile(path)
+        return isValid
+
+
 def main():
     parser = HeaderChecker.configArgParser()
     args   = parser.parse_args()
 
     # Configure the checks then run
-    checker = HeaderChecker(KERNEL_HEADER,
-                            copyright_regex=FREERTOS_COPYRIGHT_REGEX,
-                            ignored_files=KERNEL_IGNORED_FILES,
-                            ignored_ext=KERNEL_IGNORED_EXTENSIONS,
-                            ignored_patterns=KERNEL_IGNORED_PATTERNS,
-                            third_party_patterns=KERNEL_THIRD_PARTY_PATTERNS,
-                            py_ext=KERNEL_PY_EXTENSIONS,
-                            asm_ext=KERNEL_ASM_EXTENSIONS)
+    checker = KernelHeaderChecker(KERNEL_HEADER,
+                                  copyright_regex=FREERTOS_COPYRIGHT_REGEX,
+                                  ignored_files=KERNEL_IGNORED_FILES,
+                                  ignored_ext=KERNEL_IGNORED_EXTENSIONS,
+                                  ignored_patterns=KERNEL_IGNORED_PATTERNS,
+                                  third_party_patterns=KERNEL_THIRD_PARTY_PATTERNS,
+                                  py_ext=KERNEL_PY_EXTENSIONS,
+                                  asm_ext=KERNEL_ASM_EXTENSIONS)
     checker.ignoreFile(os.path.split(__file__)[-1])
 
     rc = checker.processArgs(args)

CMakeLists.txt

@@ -138,15 +138,18 @@ if(NOT FREERTOS_PORT)
         " IAR_ARM_CM33_NONSECURE           - Compiler: IAR           Target: ARM Cortex-M33 non-secure\n"
         " IAR_ARM_CM33_SECURE              - Compiler: IAR           Target: ARM Cortex-M33 secure\n"
         " IAR_ARM_CM33_NTZ_NONSECURE       - Compiler: IAR           Target: ARM Cortex-M33 non-trustzone non-secure\n"
+        " IAR_ARM_CM33_TFM                 - Compiler: IAR           Target: ARM Cortex-M33 non-secure for TF-M\n"
         " IAR_ARM_CM35P_NONSECURE          - Compiler: IAR           Target: ARM Cortex-M35P non-secure\n"
         " IAR_ARM_CM35P_SECURE             - Compiler: IAR           Target: ARM Cortex-M35P secure\n"
         " IAR_ARM_CM35P_NTZ_NONSECURE      - Compiler: IAR           Target: ARM Cortex-M35P non-trustzone non-secure\n"
         " IAR_ARM_CM55_NONSECURE           - Compiler: IAR           Target: ARM Cortex-M55 non-secure\n"
         " IAR_ARM_CM55_SECURE              - Compiler: IAR           Target: ARM Cortex-M55 secure\n"
         " IAR_ARM_CM55_NTZ_NONSECURE       - Compiler: IAR           Target: ARM Cortex-M55 non-trustzone non-secure\n"
+        " IAR_ARM_CM55_TFM                 - Compiler: IAR           Target: ARM Cortex-M55 non-secure for TF-M\n"
         " IAR_ARM_CM85_NONSECURE           - Compiler: IAR           Target: ARM Cortex-M85 non-secure\n"
         " IAR_ARM_CM85_SECURE              - Compiler: IAR           Target: ARM Cortex-M85 secure\n"
         " IAR_ARM_CM85_NTZ_NONSECURE       - Compiler: IAR           Target: ARM Cortex-M85 non-trustzone non-secure\n"
+        " IAR_ARM_CM85_TFM                 - Compiler: IAR           Target: ARM Cortex-M85 non-secure for TF-M\n"
         " IAR_ARM_CRX_NOGIC                - Compiler: IAR           Target: ARM Cortex-Rx no GIC\n"
         " IAR_ATMEGA323                    - Compiler: IAR           Target: ATMega323\n"
         " IAR_ATMEL_SAM7S64                - Compiler: IAR           Target: Atmel SAM7S64\n"

examples/coverity/README.md

@@ -17,7 +17,7 @@ files.
 
 ## Getting Started
 ### Prerequisites
-Coverity can be run on any platform mentioned [here](https://sig-docs.synopsys.com/polaris/topics/c_coverity-compatible-platforms.html).
+Coverity can be run on any platform mentioned [here](https://documentation.blackduck.com/bundle/coverity-docs/page/deploy-install-guide/topics/supported_platforms_for_coverity_analysis.html).
 The following are the prerequisites to generate coverity report:
 
 1. CMake version > 3.13.0 (You can check whether you have this by typing `cmake --version`).

include/FreeRTOS.h

@@ -3032,6 +3032,18 @@
     #define configCONTROL_INFINITE_LOOP()
 #endif
 
+/* Set configENABLE_PAC and/or configENABLE_BTI to 1 to enable PAC and/or BTI
+ * support and 0 to disable them. These are currently used in ARMv8.1-M ports. */
+#if ( portHAS_PACBTI_FEATURE == 1 )
+    #ifndef configENABLE_PAC
+        #define configENABLE_PAC    0
+    #endif
+
+    #ifndef configENABLE_BTI
+        #define configENABLE_BTI    0
+    #endif
+#endif
+
 /* Sometimes the FreeRTOSConfig.h settings only allow a task to be created using
  * dynamically allocated RAM, in which case when any task is deleted it is known
  * that both the task's stack and TCB need to be freed.  Sometimes the

portable/ARMv8M/non_secure/port.c

@@ -1,6 +1,8 @@
 /*
  * FreeRTOS Kernel <DEVELOPMENT BRANCH>
  * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ * Copyright 2024 Arm Limited and/or its affiliates
+ * <open-source-office@arm.com>
  *
  * SPDX-License-Identifier: MIT
  *
@@ -110,6 +112,7 @@ typedef void ( * portISR_t )( void );
 #define portSCB_VTOR_REG                      ( *( ( portISR_t ** ) 0xe000ed08 ) )
 #define portSCB_SYS_HANDLER_CTRL_STATE_REG    ( *( ( volatile uint32_t * ) 0xe000ed24 ) )
 #define portSCB_MEM_FAULT_ENABLE_BIT          ( 1UL << 16UL )
+#define portSCB_USG_FAULT_ENABLE_BIT          ( 1UL << 18UL )
 /*-----------------------------------------------------------*/
 
 /**
@@ -373,6 +376,20 @@ typedef void ( * portISR_t )( void );
  * any secure calls.
  */
 #define portNO_SECURE_CONTEXT    0
+
+/**
+ * @brief Constants required to check and configure PACBTI security feature implementation.
+ */
+#if ( portHAS_PACBTI_FEATURE == 1 )
+
+    #define portID_ISAR5_REG         ( *( ( volatile uint32_t * ) 0xe000ed74 ) )
+
+    #define portCONTROL_UPAC_EN      ( 1UL << 7UL )
+    #define portCONTROL_PAC_EN       ( 1UL << 6UL )
+    #define portCONTROL_UBTI_EN      ( 1UL << 5UL )
+    #define portCONTROL_BTI_EN       ( 1UL << 4UL )
+
+#endif /* portHAS_PACBTI_FEATURE */
 /*-----------------------------------------------------------*/
 
 /**
@@ -410,6 +427,26 @@ static void prvTaskExitError( void );
     static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
 #endif /* configENABLE_FPU */
 
+#if ( portHAS_PACBTI_FEATURE == 1 )
+
+/**
+ * @brief Configures PACBTI features.
+ *
+ * This function configures the Pointer Authentication, and Branch Target
+ * Identification security features as per the user configuration. It returns
+ * the value of the special purpose CONTROL register accordingly, and optionally
+ * updates the CONTROL register value. Currently, only Cortex-M85 (ARMv8.1-M
+ * architecture based) target supports PACBTI security feature.
+ *
+ * @param xWriteControlRegister Used to control whether the special purpose
+ * CONTROL register should be updated or not.
+ *
+ * @return CONTROL register value according to the configured PACBTI option.
+ */
+    static uint32_t prvConfigurePACBTI( BaseType_t xWriteControlRegister );
+
+#endif /* portHAS_PACBTI_FEATURE */
+
 /**
  * @brief Setup the timer to generate the tick interrupts.
  *
@@ -1457,6 +1494,7 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
                                          xMPU_SETTINGS * xMPUSettings ) /* PRIVILEGED_FUNCTION */
     {
         uint32_t ulIndex = 0;
+        uint32_t ulControl = 0x0;
 
         xMPUSettings->ulContext[ ulIndex ] = 0x04040404; /* r4. */
         ulIndex++;
@@ -1503,16 +1541,24 @@ void vPortSVCHandler_C( uint32_t * pulCallerStackAddress ) /* PRIVILEGED_FUNCTIO
         xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) pxEndOfStack;         /* PSPLIM. */
         ulIndex++;
 
+        #if ( portHAS_PACBTI_FEATURE == 1 )
+        {
+            /* Check PACBTI security feature configuration before pushing the
+             * CONTROL register's value on task's TCB. */
+            ulControl = prvConfigurePACBTI( pdFALSE );
+        }
+        #endif /* portHAS_PACBTI_FEATURE */
+
         if( xRunPrivileged == pdTRUE )
         {
             xMPUSettings->ulTaskFlags |= portTASK_IS_PRIVILEGED_FLAG;
-            xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) portINITIAL_CONTROL_PRIVILEGED; /* CONTROL. */
+            xMPUSettings->ulContext[ ulIndex ] = ( ulControl | ( uint32_t ) portINITIAL_CONTROL_PRIVILEGED ); /* CONTROL. */
             ulIndex++;
         }
         else
         {
             xMPUSettings->ulTaskFlags &= ( ~portTASK_IS_PRIVILEGED_FLAG );
-            xMPUSettings->ulContext[ ulIndex ] = ( uint32_t ) portINITIAL_CONTROL_UNPRIVILEGED; /* CONTROL. */
+            xMPUSettings->ulContext[ ulIndex ] = ( ulControl | ( uint32_t ) portINITIAL_CONTROL_UNPRIVILEGED ); /* CONTROL. */
             ulIndex++;
         }
 
@@ -1740,6 +1786,14 @@ BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
     portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI;
     portNVIC_SHPR2_REG = 0;
 
+    #if ( portHAS_PACBTI_FEATURE == 1 )
+    {
+        /* Set the CONTROL register value based on PACBTI security feature
+         * configuration before starting the first task. */
+        ( void) prvConfigurePACBTI( pdTRUE );
+    }
+    #endif /* portHAS_PACBTI_FEATURE */
+
     #if ( configENABLE_MPU == 1 )
     {
         /* Setup the Memory Protection Unit (MPU). */
@@ -2158,3 +2212,42 @@ BaseType_t xPortIsInsideInterrupt( void )
 
 #endif /* #if ( ( configENABLE_MPU == 1 ) && ( configUSE_MPU_WRAPPERS_V1 == 0 ) ) */
 /*-----------------------------------------------------------*/
+
+#if ( portHAS_PACBTI_FEATURE == 1 )
+
+    static uint32_t prvConfigurePACBTI( BaseType_t xWriteControlRegister )
+    {
+        uint32_t ulControl = 0x0;
+
+        /* Ensure that PACBTI is implemented. */
+        configASSERT( portID_ISAR5_REG != 0x0 );
+
+        /* Enable UsageFault exception if PAC or BTI is enabled. */
+        #if( ( configENABLE_PAC == 1 ) || ( configENABLE_BTI == 1 ) )
+        {
+            portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_USG_FAULT_ENABLE_BIT;
+        }
+        #endif
+
+        #if( configENABLE_PAC == 1 )
+        {
+            ulControl |= ( portCONTROL_UPAC_EN | portCONTROL_PAC_EN );
+        }
+        #endif
+
+        #if( configENABLE_BTI == 1 )
+        {
+            ulControl |= ( portCONTROL_UBTI_EN | portCONTROL_BTI_EN );
+        }
+        #endif
+
+        if( xWriteControlRegister == pdTRUE )
+        {
+            __asm volatile ( "msr control, %0" : : "r" ( ulControl ) );
+        }
+
+        return ulControl;
+    }
+
+#endif /* #if ( portHAS_PACBTI_FEATURE == 1 ) */
+/*-----------------------------------------------------------*/

portable/ARMv8M/non_secure/portable/GCC/ARM_CM23/portmacro.h

@@ -1,6 +1,8 @@
 /*
  * FreeRTOS Kernel <DEVELOPMENT BRANCH>
  * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ * Copyright 2024 Arm Limited and/or its affiliates
+ * <open-source-office@arm.com>
  *
  * SPDX-License-Identifier: MIT
  *
@@ -51,6 +53,7 @@
 #define portARCH_NAME                    "Cortex-M23"
 #define portHAS_ARMV8M_MAIN_EXTENSION    0
 #define portARMV8M_MINOR_VERSION         0
+#define portHAS_PACBTI_FEATURE           0
 #define portDONT_DISCARD                 __attribute__( ( used ) )
 /*-----------------------------------------------------------*/
 

portable/ARMv8M/non_secure/portable/GCC/ARM_CM23_NTZ/portmacro.h

@@ -1,6 +1,8 @@
 /*
  * FreeRTOS Kernel <DEVELOPMENT BRANCH>
  * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ * Copyright 2024 Arm Limited and/or its affiliates
+ * <open-source-office@arm.com>
  *
  * SPDX-License-Identifier: MIT
  *
@@ -51,6 +53,7 @@
 #define portARCH_NAME                    "Cortex-M23"
 #define portHAS_ARMV8M_MAIN_EXTENSION    0
 #define portARMV8M_MINOR_VERSION         0
+#define portHAS_PACBTI_FEATURE           0
 #define portDONT_DISCARD                 __attribute__( ( used ) )
 /*-----------------------------------------------------------*/