2400 Update sources patch #808

SaMMy-lacht · 2023-06-16T06:02:11Z

SaMMy-lacht
Jun 16, 2023

2400_07.50.zip

fda77 · 2023-06-16T06:42:19Z

fda77
Jun 16, 2023
Collaborator

Hast du eine 4020 und/oder 2400 zum testen? Dass die 2 die gleichen Sourcen verwenden war wahrscheinlich von mir geraten... Da müsste man sich die Sourcen etwas genauer anschauen. Für 7.2x waren Module zwar aktiviert, aber es gab nie ne Rückmeldung.
Die 2400-7.2x sourcen wurden auch nicht genutzt, sondern 7.0x (das sin die neuesten der 4020)
Bei "config FREETZ_AVM_SOURCE_FOR_SYSTEM_TYPE_QCA956x" ist das von dir hinzugefügte _MAX zuviel, 7.2x muss dann aber auch aufgeführt werden

0 replies

SaMMy-lacht · 2023-06-16T14:06:43Z

SaMMy-lacht
Jun 16, 2023
Author

So weit war ich auch schon, aber bringt nichts, denn es kommt zu einer Fehlermeldung, wenn man was aus dem Kernel bauen will. Ich habe nur das an FREETZ_MODULE_autofs4. Und dann kommt diese
linux/GNUmakefile: including /home/freetz/linux/tools/wichtig/vanilla/freetz/test/source/kernel/ref-qca956x-2400_07.50/linux-4.4/.kernelvariables
Makefile:1274: Das Ziel „_clean_samples“ steht mehrfach in derselben Regel.
make[3]: *** Keine Regel, um „vmlinux.eva_pad“ zu erstellen. Schluss.
make[2]: *** [GNUmakefile:135: vmlinux.eva_pad] Fehler 2
make[1]: *** [make/kernel/kernel.mk:216: source/kernel/ref-qca956x-2400_07.50/linux-4.4/arch/mips/boot/vmlinux.eva_pad] Beendet
make: *** [Makefile:46: envira] Beendet

Daher habe ich noch nichts weiter gesagt, da ich den Fehler erst mal beheben wollte.
Ob wir es getestet haben ;-).

3 replies

fda77 Jun 16, 2023
Collaborator

Compilier-test dauert immer etwas...

6000+1260+1260e sourcen sind im kernel-dir zu 100% identisch

fda77 Jun 16, 2023
Collaborator

2400(mips) 7.5 nach 3000/1260/1260e(arm) diff vom kernel ist recht übersichtlich:

diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW229-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW229-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW229-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW229-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -58,6 +58,7 @@
 			};
 			phy4: ethernet-phy@4 {
 				reg = <4>;
+				avm,no-suspend-phy;
 			};
 		};
 
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW236.dtsi 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW236.dtsi
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW236.dtsi	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW236.dtsi	2023-03-08 10:22:38.000000000 +0100
@@ -367,7 +367,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			/* GPIO 30 is channel 0 */
 			pwms = <&pwm 0 2550 PWM_POLARITY_INVERTED>;
 		dimmable;
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW237-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW237-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW237-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW237-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -407,7 +407,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			/* GPIO 30 is channel 0 */
 			pwms = <&pwm 0 2550 PWM_POLARITY_INVERTED>;
 		dimmable;
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -373,7 +373,7 @@
 		dim_leds: dim-leds {
 			/* brightness-range = <0>, <255>; */
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			pwms = <&pwm 0 2550 PWM_POLARITY_INVERTED>;
 			/* dimmable; */
 		};
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-2.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-2.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-2.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW247-2.dts	2023-03-08 10:22:38.000000000 +0100
@@ -373,7 +373,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			pwms = <&pwm 0 2550 PWM_POLARITY_INVERTED>;
 			dimmable;
 		};
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW258-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW258-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW258-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW258-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -382,7 +382,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			pwms = <&pwm 0 2550 PWM_POLARITY_INVERTED>;
 			dimmable;
 		};
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW261-2.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW261-2.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW261-2.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW261-2.dts	2023-03-08 10:22:38.000000000 +0100
@@ -104,7 +104,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			pwms = <&pwm 0 1312335 0>;
 			dimmable;
 		};
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW262-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW262-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW262-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW262-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -382,7 +382,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			pwms = <&pwm 0 2550 PWM_POLARITY_INVERTED>;
 			dimmable;
 		};
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -117,7 +117,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <180>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			/* GPIO 2 is channel 22*/
 			pwms = <&pwm 2 100000 0>;
 			dimmable;
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-2.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-2.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-2.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW271-2.dts	2023-03-08 10:22:38.000000000 +0100
@@ -117,7 +117,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <180>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			pwms = <&pwm 2 100000 0>;
 			dimmable;
 		};
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW272-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW272-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW272-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW272-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -117,7 +117,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			pwms = <&pwm 0 1312335 0>;
 			dimmable;
 		  };
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW276-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW276-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW276-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW276-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -407,7 +407,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <255>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			/* GPIO 30 is channel 0 */
 			pwms = <&pwm 0 2550 PWM_POLARITY_INVERTED>;
 			dimmable;
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-0.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-0.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-0.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-0.dts	2023-03-08 10:22:38.000000000 +0100
@@ -117,7 +117,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <180>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			/* GPIO 2 is channel 22*/
 			pwms = <&pwm 2 100000 0>;
 			dimmable;
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-2.dts 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-2.dts
--- 2400/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-2.dts	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/arch/arm/boot/dts/Fritz_Box_HW278-2.dts	2023-03-08 10:22:38.000000000 +0100
@@ -117,7 +117,7 @@
 		dim_leds: dim-leds {
 			brightness-range = <0>, <180>;
 			compatible = "avm,hui-generic-led-pwm";
-			led-type = "default-on";
+			led-type = "always-on";
 			/* GPIO 46 is channel 0 */
 			pwms = <&pwm 0 100000 0>;
 			dimmable;
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/drivers/char/tffs/nand_noob.c 3000-750/sources/kernel/linux/drivers/char/tffs/nand_noob.c
--- 2400/sources/kernel/linux/drivers/char/tffs/nand_noob.c	2022-12-21 11:28:17.000000000 +0100
+++ 3000-750/sources/kernel/linux/drivers/char/tffs/nand_noob.c	2023-03-08 10:22:39.000000000 +0100
@@ -2212,10 +2212,10 @@
 	offset		 = entry_offs + read_len;
 	// Always read to page boundaries.
 	while (offset < end_offs) {
+		read_len = min(ctx->buffer_size, (size_t)(end_offs - offset));
 		if (bad_page_i < blk->num_bad_pages && offset == blk->bad_pages[bad_page_i]) {
 			offset += read_len;
 			end_offs += ctx->buffer_size;
-			read_len = min(ctx->buffer_size, (size_t)(end_offs - offset));
 			bad_page_i++;
 			continue;
 		}
@@ -2228,7 +2228,6 @@
 		}
 		offset += read_len;
 		tmp_crc	 = crc32_be(tmp_crc, ctx->rw_buffer, read_len);
-		read_len = min(ctx->buffer_size, (size_t)(end_offs - offset));
 	};
 
 	if (result || tmp_crc != hdr_crc) {
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/drivers/net/phy/phy_device.c 3000-750/sources/kernel/linux/drivers/net/phy/phy_device.c
--- 2400/sources/kernel/linux/drivers/net/phy/phy_device.c	2022-12-21 11:28:18.000000000 +0100
+++ 3000-750/sources/kernel/linux/drivers/net/phy/phy_device.c	2023-03-08 10:22:40.000000000 +0100
@@ -183,6 +183,10 @@
 
 	dev->state = PHY_DOWN;
 
+	/* AVM start */
+	dev->avm_no_suspend = false;
+	/* AVM end */
+
 	mutex_init(&dev->lock);
 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
 	INIT_WORK(&dev->phy_queue, phy_change);
@@ -780,7 +784,12 @@
 
 	/* If the device has WOL enabled, we cannot suspend the PHY */
 	phy_ethtool_get_wol(phydev, &wol);
-	if (wol.wolopts)
+	/* AVM/PME: Use Flag set by ssdk(_dts) here
+	 * to fix LED on F!PLC 1260Ev1. So return
+	 * with error like wol check
+	 * because we don't want PHY suspend.
+	 */
+	if (wol.wolopts || phydev->avm_no_suspend)
 		return -EBUSY;
 
 	if (phydrv->suspend)
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/include/linux/phy.h 3000-750/sources/kernel/linux/include/linux/phy.h
--- 2400/sources/kernel/linux/include/linux/phy.h	2022-12-21 11:28:19.000000000 +0100
+++ 3000-750/sources/kernel/linux/include/linux/phy.h	2023-03-08 10:22:40.000000000 +0100
@@ -343,6 +343,7 @@
  * phy_timer: The timer for handling the state machine
  * phy_queue: A work_queue for the interrupt
  * attached_dev: The attached enet driver's device instance ptr
+ * avm_no_suspend: If set to false PHY can not be suspended.
  * adjust_link: Callback for the enet controller to respond to
  * changes in the link state.
  *
@@ -429,6 +430,9 @@
 
 	u8 mdix;
 
+	/* AVM/PME: PHY suspend suppress flag for F!PLC 1260Ev1*/
+	bool avm_no_suspend;
+
 	void (*adjust_link)(struct net_device *dev);
 };
 #define to_phy_device(d) container_of(d, struct phy_device, dev)
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/.kernelvariables 3000-750/sources/kernel/linux/.kernelvariables
--- 2400/sources/kernel/linux/.kernelvariables	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/.kernelvariables	2023-03-08 10:22:38.000000000 +0100
@@ -2,12 +2,12 @@
 # vim: set autoread filetype=make:
 #
 # Auto-generated at 1.116-v1.116
-# while generating for drgfly
+# while generating for cortexa9
 #
-ARCH = mips
+ARCH = arm
 export ARCH
 
-CROSS_COMPILE = mips-buildroot-linux-uclibc-
+CROSS_COMPILE = arm-buildroot-linux-uclibcgnueabi-
 export CROSS_COMPILE
 CONFIG_CROSS_COMPILE = $(CROSS_COMPILE)
 export CONFIG_CROSS_COMPILE
@@ -26,7 +26,7 @@
 
 EXTRA_CFLAGS = 
 
-export AVM_KCONFIG_CONFIG = ../linux/avm/conf/linux-4.4.drgfly
+export AVM_KCONFIG_CONFIG = ../linux/avm/conf/linux-4.4.cortexa9
 
 # Enable reproducibility by setting 'reproducibility' to any nonempty value;
 # defaults of KBUILD_BUILD_* and SOURCE_DATE_EPOCH match the variables that
@@ -34,10 +34,10 @@
 #reproducibility = yes
 
 ifneq ($(reproducibility),)
-export SOURCE_DATE_EPOCH = 1669972811
+export SOURCE_DATE_EPOCH = 1673604118
 export KBUILD_BUILD_USER = kbuild-team
 export KBUILD_BUILD_HOST = core.avm.de
-export KBUILD_BUILD_TIMESTAMP = 2022-12-02
+export KBUILD_BUILD_TIMESTAMP = 2023-01-13
 endif
 # No variables exported via $(kernelvariables_extra)
 
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/.kernelvariables.avm 3000-750/sources/kernel/linux/.kernelvariables.avm
--- 2400/sources/kernel/linux/.kernelvariables.avm	2022-12-21 11:28:16.000000000 +0100
+++ 3000-750/sources/kernel/linux/.kernelvariables.avm	2023-03-08 10:22:38.000000000 +0100
@@ -2,7 +2,7 @@
 # vim: set autoread filetype=make:
 #
 # Auto-generated by 1.116-v1.116
-# while generating for drgfly
+# while generating for cortexa9
 #
 # Will be regenerated at each call of ../Makefile.
 #
@@ -21,10 +21,10 @@
 $(call show_info,Found GU top-level in $(FRITZ_BOX_BUILD_DIR))
 endif
 
-ARCH = mips
+ARCH = arm
 export ARCH
 
-CROSS_COMPILE = mips-buildroot-linux-uclibc-
+CROSS_COMPILE = arm-buildroot-linux-uclibcgnueabi-
 export CROSS_COMPILE
 CONFIG_CROSS_COMPILE = $(CROSS_COMPILE)
 export CONFIG_CROSS_COMPILE
@@ -36,7 +36,7 @@
 override LD_LIBRARY_PATH = $(_ld_library_path)
 export LD_LIBRARY_PATH
 
-_gu_path := $(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/5ec6bdcd4d368349fc6205f3b1f637a383fc3caa/usr/sbin:$(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/5ec6bdcd4d368349fc6205f3b1f637a383fc3caa/usr/bin:$(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/5ec6bdcd4d368349fc6205f3b1f637a383fc3caa/sbin:$(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/5ec6bdcd4d368349fc6205f3b1f637a383fc3caa/bin:$(PATH)
+_gu_path := $(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/a5e43e41a93ca8a2f42a352d3823f9ad66ea0a71/usr/sbin:$(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/a5e43e41a93ca8a2f42a352d3823f9ad66ea0a71/usr/bin:$(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/a5e43e41a93ca8a2f42a352d3823f9ad66ea0a71/sbin:$(FRITZ_BOX_BUILD_DIR)/tmp/sysroot/a5e43e41a93ca8a2f42a352d3823f9ad66ea0a71/bin:$(PATH)
 override PATH := $(_gu_path)
 export PATH
 
@@ -63,11 +63,11 @@
 export LOCALVERSION
 
 ifeq ($(INSTALL_HDR_PATH),)
-override INSTALL_HDR_PATH = $(FRITZ_BOX_BUILD_DIR)/KERNEL_drgfly_build/src/main/filesystem/usr
+override INSTALL_HDR_PATH = $(FRITZ_BOX_BUILD_DIR)/KERNEL_cortexa9_build/src/main/filesystem/usr
 $(call show_info,.kernelvariables: Using cached INSTALL_HDR_PATH=$(INSTALL_HDR_PATH))
 endif
 ifeq ($(INSTALL_MOD_PATH),)
-override INSTALL_MOD_PATH = $(FRITZ_BOX_BUILD_DIR)/KERNEL_drgfly_build/src/main/filesystem
+override INSTALL_MOD_PATH = $(FRITZ_BOX_BUILD_DIR)/KERNEL_cortexa9_build/src/main/filesystem
 $(call show_info,.kernelvariables: Using cached INSTALL_MOD_PATH=$(INSTALL_MOD_PATH))
 endif
 override INSTALL_HDR_PATH := $(INSTALL_HDR_PATH)
@@ -80,7 +80,7 @@
 CONFIG_DEBUG_SECTION_MISMATCH ?= y
 export CONFIG_DEBUG_SECTION_MISMATCH
 
-export AVM_KCONFIG_CONFIG = ../linux/avm/conf/linux-4.4.drgfly
+export AVM_KCONFIG_CONFIG = ../linux/avm/conf/linux-4.4.cortexa9
 
 # Possibly, variables specified in $(kernelvariables_extra) will follow here:
 
diff -dauNr --no-dereference --color 2400/sources/kernel/linux/mm/vmalloc.c 3000-750/sources/kernel/linux/mm/vmalloc.c
--- 2400/sources/kernel/linux/mm/vmalloc.c	2022-12-21 11:28:19.000000000 +0100
+++ 3000-750/sources/kernel/linux/mm/vmalloc.c	2023-03-08 10:22:41.000000000 +0100
@@ -473,7 +473,7 @@
 		purged = 1;
 		goto retry;
 	}
-	if (printk_ratelimit())
+	if (!(gfp_mask & __GFP_NOWARN) && printk_ratelimit())
 		pr_warn("vmap allocation for size %lu failed: "
 			"use vmalloc=<size> to increase size.\n", size);
 	kfree(va);

fda77 Jun 16, 2023
Collaborator

1200(in freetz) + 6000+1260+1260e sourcen sind im kernel-dir zu 100% identisch

SaMMy-lacht · 2023-06-16T14:18:40Z

SaMMy-lacht
Jun 16, 2023
Author

Meinst du nicht
1200 und 1260 und 1260E sind gleich ;-). Denn für den 6000 gibt es doch kein 7.5

freetz-ng/config/avm/hardware.in

Line 112 in 634ecf4

FREETZ_TYPE_1200 || \

bei der 7.27 habe ich denn gleichen fehler ;-(

16 replies

fda77 Jun 16, 2023
Collaborator

Hm, es steht da aber kernel version "4.4.271", damit 7.5x . die 7.2x hat 4.4.60

SaMMy-lacht Jun 16, 2023
Author

Nein seht da nicht aber auch egal

processing kernel
checking kernel version
... used by AVM ...... 4.4.60
... used by Freetz ... 4.4.60
installing and stripping modules
ecb.ko ............................ 1.46 Kb
arc4.ko ........................... 1.21 Kb
WARNING: File of kernel module not found: cifs.ko
WARNING: File of kernel module not found: cmac.ko
WARNING: File of kernel module not found: des_generic.ko
WARNING: File of kernel module not found: hmac.ko
WARNING: File of kernel module not found: md4.ko
WARNING: File of kernel module not found: md5.ko
WARNING: File of kernel module not found: sha256_generic.ko
ERROR: Enable missing with 'make kernel-menuconfig' as (M)odule (and push a pull request). Use '/' to search in menuconfig.
FINISHED

fda77 Jun 16, 2023
Collaborator

achso, mir war nciht klar dass sie die erste hälfte von #808 (reply in thread) auf eine ander fw wie der 2. teil bezieht

SaMMy-lacht Jun 16, 2023
Author

Alles gut ;-)

fda77 Jun 16, 2023
Collaborator

Von diesem gateway dingens und 6690 fehlen noch "stable"-sourcen. Die 7582-715 könntest du dir mal anschauen, ich blick nicht durch was avm da getrieben hat.

SaMMy-lacht · 2023-06-16T19:54:55Z

SaMMy-lacht
Jun 16, 2023
Author

Ich habe mir schon mal die 7581 und 7582 angeschaut, da fehlen einfach einige Sachen drin. Daher steige ich da so auch noch nicht durch, wie man das umgehen kann.

Finde es aber schon mal gut das nun auch die 7590 fw 7.56 freigegeben hast ;-)

das mit der 6690 und sourcen da weiß ich das da mehrerer schon angefragt haben bei AVM. Ich gehe davon aus, dass der Gateway auf die gleiche sourcen wie die 5590 greift. Aber sicher bin ich mir aber nicht.

Würde sogar fast das Sagen

select FREETZ_AVM_SOURCE_5590_07_50 if FREETZ_AVM_VERSION_07_5X_MIN && (FREETZ_TYPE_1209 || FREETZ_TYPE_3009 || FREETZ_TYPE_4060 || FREETZ_TYPE_5590 || FREETZ_TYPE_7510 || FREETZ_TYPE_GATE)

denn man kann damit die labor 4060 zb auch bauen

0 replies

fda77 · 2023-06-16T21:09:07Z

fda77
Jun 16, 2023
Collaborator

Bei der 7582 hat avm den kernel komplett anders zusammenbenastelt, aber es gibt ein script/readme wie man das verwenden soll. Ich hatte nur bislang noch keine Lust dazu und hab auf ein neues FOS gehofft, aber scheinbar bekommen die keins mehr

Ob das mit der 7590 funktoiniert weiss ich nicht, die config ist eine uralte noch von einer älteren kernelversion. In welchem Zustand de source ist weiss man daher auch nicht. Aber avm kann ja nicht alles können :) Müsst dann jemand mit so einem gerät ausprobieren

Welches Problem gibt es denn mit der 4060? Die läuft unverändert durch:

packing fitimg file
  fitimg file size: 34.4 MB, max 80.0 MB, free 45.6 MB (47853225 bytes)
packing images/4060_07.51.all-rev105129_labor.image
  packed image file size: 34.7 MB (36423680 bytes)
source firmware: 4060_de-es-fr-it-nl-pl 261.07.51-BETA rev105129 {ALL} [MOVE21NL1] (22.04.2023 03:11:34)
  source image file size: 33.4 MB (35041280 bytes)

5590 source würde ich für sonst keine verwenden, die hat 3 cpus (nicht cores). Ich glaub avm wollte ganz schnell was mit fiber haben das schnell fertig ist...

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

2400 Update sources patch #808

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 5 comments 19 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

Select a reply

2400 Update sources patch #808

SaMMy-lacht Jun 16, 2023

Replies: 5 comments · 19 replies

fda77 Jun 16, 2023 Collaborator

SaMMy-lacht Jun 16, 2023 Author

fda77 Jun 16, 2023 Collaborator

fda77 Jun 16, 2023 Collaborator

fda77 Jun 16, 2023 Collaborator

SaMMy-lacht Jun 16, 2023 Author

fda77 Jun 16, 2023 Collaborator

SaMMy-lacht Jun 16, 2023 Author

fda77 Jun 16, 2023 Collaborator

SaMMy-lacht Jun 16, 2023 Author

fda77 Jun 16, 2023 Collaborator

SaMMy-lacht Jun 16, 2023 Author

fda77 Jun 16, 2023 Collaborator

SaMMy-lacht
Jun 16, 2023

Replies: 5 comments 19 replies

fda77
Jun 16, 2023
Collaborator

SaMMy-lacht
Jun 16, 2023
Author

fda77 Jun 16, 2023
Collaborator

fda77 Jun 16, 2023
Collaborator

fda77 Jun 16, 2023
Collaborator

SaMMy-lacht
Jun 16, 2023
Author

fda77 Jun 16, 2023
Collaborator

SaMMy-lacht Jun 16, 2023
Author

fda77 Jun 16, 2023
Collaborator

SaMMy-lacht Jun 16, 2023
Author

fda77 Jun 16, 2023
Collaborator

SaMMy-lacht
Jun 16, 2023
Author

fda77
Jun 16, 2023
Collaborator