From 227a4bedecbbe5ae4b42c0ec88d8051b5f125b0a Mon Sep 17 00:00:00 2001
From: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date: Wed, 28 Feb 2024 15:50:49 -0800
Subject: [PATCH] Use FAN_SOFT_PWM

---
 config/examples/BIQU/BX/Configuration.h     | 2 +-
 config/examples/BIQU/BX/Configuration_adv.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h
index b17037099aa..77ed830bd24 100644
--- a/config/examples/BIQU/BX/Configuration.h
+++ b/config/examples/BIQU/BX/Configuration.h
@@ -3502,7 +3502,7 @@
 // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
 // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
 // is too low, you should also increment SOFT_PWM_SCALE.
-//#define FAN_SOFT_PWM
+#define FAN_SOFT_PWM
 
 // Incrementing this by 1 will double the software PWM frequency,
 // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h
index 8e9997fcad3..f23dc95fb6e 100644
--- a/config/examples/BIQU/BX/Configuration_adv.h
+++ b/config/examples/BIQU/BX/Configuration_adv.h
@@ -602,7 +602,7 @@
  * gets it spinning reliably for a short time before setting the requested speed.
  * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
  */
-//#define FAN_KICKSTART_TIME  100  // (ms)
+#define FAN_KICKSTART_TIME    100  // (ms)
 //#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
@@ -620,7 +620,7 @@
  *
  * Define one or both of these to override the default 0-255 range.
  */
-//#define FAN_MIN_PWM 50
+#define FAN_MIN_PWM   26
 //#define FAN_MAX_PWM 128
 
 /**