Fix alternate extra wall warning: change ensure vertical shell thickn…

…ess to Moderate instead of None (#4463)

* fix warning

* Update locale

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-10 23:17+0800\n"
+"POT-Creation-Date: 2024-03-13 22:09+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -3173,14 +3173,14 @@ msgid ""
 msgstr ""
 
 msgid ""
-"Alternate extra wall only works with ensure vertical shell thickness "
-"disabled. "
+"Alternate extra wall does't work well when ensure vertical shell thickness "
+"is set to All. "
 msgstr ""
 
 msgid ""
 "Change these settings automatically? \n"
-"Yes - Disable ensure vertical shell thickness and enable alternate extra "
-"wall\n"
+"Yes - Change ensure vertical shell thickness to Moderate and enable "
+"alternate extra wall\n"
 "No  - Dont use alternate extra wall"
 msgstr ""
 

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-10 23:17+0800\n"
+"POT-Creation-Date: 2024-03-13 22:09+0800\n"
 "PO-Revision-Date: 2024-02-17 22:49+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3414,22 +3414,16 @@ msgstr ""
 "No - Renunciar a utilitzar el mode espiral aquesta vegada"
 
 msgid ""
-"Alternate extra wall only works with ensure vertical shell thickness "
-"disabled. "
+"Alternate extra wall does't work well when ensure vertical shell thickness "
+"is set to All. "
 msgstr ""
-"El perímetre addicional alternat només funciona amb el gruix vertical de la "
-"carcassa desactivat. "
 
 msgid ""
 "Change these settings automatically? \n"
-"Yes - Disable ensure vertical shell thickness and enable alternate extra "
-"wall\n"
+"Yes - Change ensure vertical shell thickness to Moderate and enable "
+"alternate extra wall\n"
 "No  - Dont use alternate extra wall"
 msgstr ""
-"Canviar aquesta configuració automàticament? \n"
-"Sí - Desactivar assegurar el gruix vertical de la carcassa i activar un "
-"perímetre addicional alternat\n"
-"No - No utilitzar perímetre addicional alternat"
 
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
@@ -15399,6 +15393,24 @@ msgstr ""
 "augmentar adequadament la temperatura del llit pot reduir la probabilitat de "
 "deformació."
 
+#~ msgid ""
+#~ "Alternate extra wall only works with ensure vertical shell thickness "
+#~ "disabled. "
+#~ msgstr ""
+#~ "El perímetre addicional alternat només funciona amb el gruix vertical de "
+#~ "la carcassa desactivat. "
+
+#~ msgid ""
+#~ "Change these settings automatically? \n"
+#~ "Yes - Disable ensure vertical shell thickness and enable alternate extra "
+#~ "wall\n"
+#~ "No  - Dont use alternate extra wall"
+#~ msgstr ""
+#~ "Canviar aquesta configuració automàticament? \n"
+#~ "Sí - Desactivar assegurar el gruix vertical de la carcassa i activar un "
+#~ "perímetre addicional alternat\n"
+#~ "No - No utilitzar perímetre addicional alternat"
+
 #~ msgid ""
 #~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
 #~ "thickness (top+bottom solid layers)"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-10 23:17+0800\n"
+"POT-Creation-Date: 2024-03-13 22:09+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -3354,14 +3354,14 @@ msgstr ""
 "Ne - zrušit povolení spirálového režimu"
 
 msgid ""
-"Alternate extra wall only works with ensure vertical shell thickness "
-"disabled. "
+"Alternate extra wall does't work well when ensure vertical shell thickness "
+"is set to All. "
 msgstr ""
 
 msgid ""
 "Change these settings automatically? \n"
-"Yes - Disable ensure vertical shell thickness and enable alternate extra "
-"wall\n"
+"Yes - Change ensure vertical shell thickness to Moderate and enable "
+"alternate extra wall\n"
 "No  - Dont use alternate extra wall"
 msgstr ""
 

localization/i18n/de/OrcaSlicer_de.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-10 23:17+0800\n"
+"POT-Creation-Date: 2024-03-13 22:09+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -3455,22 +3455,16 @@ msgstr ""
 "Nein - Spiralmodus nicht aktivieren"
 
 msgid ""
-"Alternate extra wall only works with ensure vertical shell thickness "
-"disabled. "
+"Alternate extra wall does't work well when ensure vertical shell thickness "
+"is set to All. "
 msgstr ""
-"Die alternative zusätzliche Wand funktioniert nur, wenn die vertikale "
-"Schalendicke deaktiviert ist."
 
 msgid ""
 "Change these settings automatically? \n"
-"Yes - Disable ensure vertical shell thickness and enable alternate extra "
-"wall\n"
+"Yes - Change ensure vertical shell thickness to Moderate and enable "
+"alternate extra wall\n"
 "No  - Dont use alternate extra wall"
 msgstr ""
-"Diese Einstellungen automatisch ändern? \n"
-"Ja - Vertikale Schalendicke deaktivieren und alternative zusätzliche Wand "
-"aktivieren\n"
-"Nein - Keine alternative zusätzliche Wand verwenden"
 
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
@@ -15608,6 +15602,24 @@ msgstr ""
 "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die "
 "Wahrscheinlichkeit von Verwerfungen verringert werden kann."
 
+#~ msgid ""
+#~ "Alternate extra wall only works with ensure vertical shell thickness "
+#~ "disabled. "
+#~ msgstr ""
+#~ "Die alternative zusätzliche Wand funktioniert nur, wenn die vertikale "
+#~ "Schalendicke deaktiviert ist."
+
+#~ msgid ""
+#~ "Change these settings automatically? \n"
+#~ "Yes - Disable ensure vertical shell thickness and enable alternate extra "
+#~ "wall\n"
+#~ "No  - Dont use alternate extra wall"
+#~ msgstr ""
+#~ "Diese Einstellungen automatisch ändern? \n"
+#~ "Ja - Vertikale Schalendicke deaktivieren und alternative zusätzliche Wand "
+#~ "aktivieren\n"
+#~ "Nein - Keine alternative zusätzliche Wand verwenden"
+
 #~ msgid ""
 #~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
 #~ "thickness (top+bottom solid layers)"

localization/i18n/en/OrcaSlicer_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-10 23:17+0800\n"
+"POT-Creation-Date: 2024-03-13 22:09+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3307,14 +3307,14 @@ msgstr ""
 "No  - Cancel enabling spiral mode"
 
 msgid ""
-"Alternate extra wall only works with ensure vertical shell thickness "
-"disabled. "
+"Alternate extra wall does't work well when ensure vertical shell thickness "
+"is set to All. "
 msgstr ""
 
 msgid ""
 "Change these settings automatically? \n"
-"Yes - Disable ensure vertical shell thickness and enable alternate extra "
-"wall\n"
+"Yes - Change ensure vertical shell thickness to Moderate and enable "
+"alternate extra wall\n"
 "No  - Dont use alternate extra wall"
 msgstr ""
 

localization/i18n/es/OrcaSlicer_es.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-10 23:17+0800\n"
+"POT-Creation-Date: 2024-03-13 22:09+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -3433,21 +3433,16 @@ msgstr ""
 "No - Dejar de usar el modo espiral esta vez"
 
 msgid ""
-"Alternate extra wall only works with ensure vertical shell thickness "
-"disabled. "
+"Alternate extra wall does't work well when ensure vertical shell thickness "
+"is set to All. "
 msgstr ""
-"La pared adicional alternativa sólo funciona si se desactiva la opción de "
-"asegurar el grosor del perímetro vertical. "
 
 msgid ""
 "Change these settings automatically? \n"
-"Yes - Disable ensure vertical shell thickness and enable alternate extra "
-"wall\n"
+"Yes - Change ensure vertical shell thickness to Moderate and enable "
+"alternate extra wall\n"
 "No  - Dont use alternate extra wall"
 msgstr ""
-"¿Cambiar estos ajustes automáticamente? \n"
-"Sí - Desactivar el grosor del perímetro vertical y activar la pared "
-"adicional alternativa No - No utilizar la pared adicional alternativa"
 
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
@@ -7142,8 +7137,8 @@ msgstr "Ignorar"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Cuando grabamos timelapse sin cabezal de impresión, es recomendable añadir "
 "un \"Torre de Purga de Intervalo\" \n"
@@ -10681,10 +10676,10 @@ msgstr "Velocidad máxima del ventilador en la capa"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "La velocidad de ventilador se incrementará linealmente de cero a "
 "\"close_fan_the_first_x_layers\" al máximo de capa \"full_fan_speed_layer\". "
@@ -13846,12 +13841,12 @@ msgstr ""
 "wiki.\n"
 "\n"
 "Normalmente la calibración es innecesaria. Cuando se inicia una impresión de "
-"un solo color/material, con la opción \"Calibración de la dinámica de "
-"caudal\" marcada en el menú de inicio de impresión, la impresora seguirá el "
-"método antiguo, calibrar el filamento antes de la impresión; Cuando se "
-"inicia una impresión de varios colores/materiales, la impresora utilizará el "
-"parámetro de compensación por defecto para el filamento durante cada cambio "
-"de filamento que tendrá un buen resultado en la mayoría de los casos.\n"
+"un solo color/material, con la opción \"Calibración de la dinámica de caudal"
+"\" marcada en el menú de inicio de impresión, la impresora seguirá el método "
+"antiguo, calibrar el filamento antes de la impresión; Cuando se inicia una "
+"impresión de varios colores/materiales, la impresora utilizará el parámetro "
+"de compensación por defecto para el filamento durante cada cambio de "
+"filamento que tendrá un buen resultado en la mayoría de los casos.\n"
 "\n"
 "Tenga en cuenta que hay algunos casos en los que el resultado de la "
 "calibración no es fiable: el uso de una placa de textura para hacer la "
@@ -14623,8 +14618,8 @@ msgstr ""
 "¿Quieres reescribirlo?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 "Cambiaríamos el nombre de los preajustes a \"Número de serie del Vendedor "
@@ -15615,6 +15610,23 @@ msgstr ""
 "aumentar adecuadamente la temperatura del lecho térmico puede reducir la "
 "probabilidad de deformaciones."
 
+#~ msgid ""
+#~ "Alternate extra wall only works with ensure vertical shell thickness "
+#~ "disabled. "
+#~ msgstr ""
+#~ "La pared adicional alternativa sólo funciona si se desactiva la opción de "
+#~ "asegurar el grosor del perímetro vertical. "
+
+#~ msgid ""
+#~ "Change these settings automatically? \n"
+#~ "Yes - Disable ensure vertical shell thickness and enable alternate extra "
+#~ "wall\n"
+#~ "No  - Dont use alternate extra wall"
+#~ msgstr ""
+#~ "¿Cambiar estos ajustes automáticamente? \n"
+#~ "Sí - Desactivar el grosor del perímetro vertical y activar la pared "
+#~ "adicional alternativa No - No utilizar la pared adicional alternativa"
+
 #~ msgid ""
 #~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
 #~ "thickness (top+bottom solid layers)"
@@ -15658,8 +15670,8 @@ msgstr ""
 #~ msgstr "Capas de baja densidad (EXPERIMENTAL)"
 
 #~ msgid ""
-#~ "We would rename the presets as \"Vendor Type Serial @printer you "
-#~ "selected\". \n"
+#~ "We would rename the presets as \"Vendor Type Serial @printer you selected"
+#~ "\". \n"
 #~ "To add preset for more prinetrs, Please go to printer selection"
 #~ msgstr ""
 #~ "Cambiaremos el nombre de los perfiles a \"Tipo Número de Serie @impresora "