Update default filaments for printers (#8655)

* update M1

* update Voron

* update Positron

* update Biqu

* update Eryone

* update Folgetech

* update Geeetech

* update Kingroon

* update MagicMaker

* update Raise3D

* update Rolohaun

* update Tronxy

* update Kingroon and Tronxy

* update Voxelab

* update Wanhao

* more fix

resources/profiles/BIQU/machine/BIQU B1.json

@@ -8,5 +8,5 @@
     "bed_model": "biqu_b1_buildplate_model.stl",
     "bed_texture": "biqu_b1_buildplate_texture.png",
     "hotend_model": "biqu_b1_hotend.stl",
-    "default_materials": "BIQU Generic PLA;BIQU Generic PETG;BIQU Generic ABS"
+    "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
 }

resources/profiles/BIQU/machine/BIQU BX.json

@@ -8,5 +8,5 @@
     "bed_model": "biqu_bx_buildplate_model.stl",
     "bed_texture": "biqu_bx_buildplate_texture.png",
     "hotend_model": "biqu_bx_hotend.stl",
-    "default_materials": "BIQU Generic PLA;BIQU Generic PETG;BIQU Generic ABS"
+    "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
 }

resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json

@@ -138,7 +138,7 @@
     "1"
   ],
   "default_filament_profile": [
-    "BIQU Generic PLA"
+    "Generic PLA @System"
   ],
   "bed_exclude_area": [
     "0x0"

resources/profiles/BIQU/machine/BIQU Hurakan.json

@@ -8,5 +8,5 @@
     "bed_model": "biqu_hurakan_buildplate_model.stl",
     "bed_texture": "biqu_hurakan_buildplate_texture.png",
     "hotend_model": "biqu_hurakan_hotend.stl",
-    "default_materials": "BIQU Generic PLA;BIQU Generic PETG;BIQU Generic ABS"
+    "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
 }

resources/profiles/BIQU/machine/fdm_biqu_common.json

@@ -124,7 +124,7 @@
     "1"
   ],
   "default_filament_profile": [
-    "BIQU Generic PLA"
+    "Generic PLA @System"
   ],
   "bed_exclude_area": [
     "0x0"

resources/profiles/BIQU/machine/fdm_klipper_common.json

@@ -125,7 +125,7 @@
     "1"
   ],
   "default_filament_profile": [
-    "BIQU Generic PLA"
+    "Generic PLA @System"
   ],
   "bed_exclude_area": [
     "0x0"

resources/profiles/Chuanying/machine/Chuanying X1.json

@@ -8,5 +8,5 @@
 	"bed_model": "chuanying_x1_buildplate_model.STL",
 	"bed_texture": "chuanying_x1_buildplate_texture.png",
 	"hotend_model": "chuanying_x1_hotend.STL",
-	"default_materials": "Flashforge Generic PETG;Flashforge Generic PLA"
+	"default_materials": "Chuanying Generic PETG;Chuanying Generic PLA"
 }

resources/profiles/Chuanying/machine/fdm_chuanying_common.json

@@ -124,7 +124,7 @@
     "1"
   ],
   "default_filament_profile": [
-    "Flashforge Generic PLA"
+    "Chuanying Generic PLA"
   ],
   "default_print_profile": "0.20mm Standard @Chuanying X1",
   "bed_exclude_area": [

resources/profiles/Chuanying/machine/fdm_klipper_common.json

@@ -125,7 +125,7 @@
     "1"
   ],
   "default_filament_profile": [
-    "Flashforge Generic ABS"
+    "Chuanying Generic ABS"
   ],
   "default_print_profile": "0.20mm Standard @Chuanying X1",
   "bed_exclude_area": [

resources/profiles/Chuanying/machine/fdm_x1_common.json

@@ -37,7 +37,7 @@
 	"single_extruder_multi_material": "0",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M25",
-	"default_filament_profile": [ "Flashforge Generic PLA" ],
+	"default_filament_profile": [ "Chuanying Generic PLA" ],
 	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-0.2 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0",
 	"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",

resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus.json

@@ -105,7 +105,7 @@
     "machine_end_gcode": "end_print",
     "change_filament_gcode": "FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]",
     "default_filament_profile": [
-		"Co Print PLA"
+		"CoPrint Generic PLA"
 	],
     "extruder_clearance_radius": [
         "65"

resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3.json

@@ -105,7 +105,7 @@
     "machine_end_gcode": "end_print",
     "change_filament_gcode": "FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]",
     "default_filament_profile": [
-		"Co Print PLA"
+		"CoPrint Generic PLA"
 	],
     "extruder_clearance_radius": [
         "65"

resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle fast.json

@@ -105,7 +105,7 @@
     "machine_end_gcode": "end_print",
     "change_filament_gcode": "FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]",
     "default_filament_profile": [
-		"Co Print PLA"
+		"CoPrint Generic PLA"
 	],
     "extruder_clearance_radius": [
         "65"

resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle.json

@@ -105,7 +105,7 @@
     "machine_end_gcode": "end_print",
     "change_filament_gcode": "FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]",
     "default_filament_profile": [
-		"Co Print PLA"
+		"CoPrint Generic PLA"
 	],
     "extruder_clearance_radius": [
         "65"

resources/profiles/Co Print/machine/Co Print ChromaSet.json

@@ -8,5 +8,5 @@
     "bed_model": "",
     "bed_texture": "Co_Print_ChromaSet_buildplate_texture.png",
     "hotend_model": "",
-    "default_materials": "Co Print PLA"
+    "default_materials": "CoPrint Generic PLA"
 }

resources/profiles/Co Print/machine/fdm_coprint_common.json

@@ -100,7 +100,7 @@
 	"machine_start_gcode": "start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "end_print",
     "default_filament_profile": [
-		"Co Print PLA"
+		"CoPrint Generic PLA"
 	],
     "extruder_clearance_radius": [
         "65"

resources/profiles/Creality/filament/Creality Generic ABS @Hi-all.json

@@ -1,7 +1,7 @@
 {
 	"type": "filament",
 	"setting_id": "GFSA04_CREALITY_00",
-	"name": "Creality Generic ABS @Hi",
+	"name": "Creality Generic ABS @Hi-all",
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "Creality Generic ABS",

resources/profiles/Custom/machine/fdm_klipper_common.json

@@ -46,7 +46,7 @@
   "single_extruder_multi_material": "1",
   "change_filament_gcode": "",
   "wipe": ["1"],
-  "default_filament_profile": ["My Generic ABS"],
+  "default_filament_profile": ["Generic PLA @System"],
   "default_print_profile": "0.20mm Standard @MyKlipper",
   "bed_exclude_area": ["0x0"],
   "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",

resources/profiles/Custom/machine/fdm_rrf_common.json

@@ -124,7 +124,7 @@
         "1"
     ],
     "default_filament_profile": [
-        "My Generic ABS"
+        "Generic PLA @System"
     ],
     "default_print_profile": "0.20mm Standard @MyRRF",
     "bed_exclude_area": [

resources/profiles/Custom/machine/fdm_toolchanger_common.json

@@ -7,7 +7,7 @@
     "gcode_flavor": "klipper",
     "single_extruder_multi_material": "0",
     "default_filament_profile": [
-        "My Generic PLA @MyToolChanger"
+        "Generic PLA @MyToolChanger"
     ],
     "default_print_profile": "0.20mm Standard @MyToolChanger",
     "max_layer_height": [

resources/profiles/DeltaMaker/machine/fdm_klipper_common.json

@@ -46,7 +46,7 @@
   "single_extruder_multi_material": "1",
   "change_filament_gcode": "",
   "wipe": ["1"],
-  "default_filament_profile": ["DeltaMaker PLA"],
+  "default_filament_profile": ["DeltaMaker Generic PLA"],
   "default_print_profile": "0.20mm Standard @DeltaMaker 2 0.35 nozzle",
   "bed_exclude_area": ["0x0"],
   "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nSTART_PRINT EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",

resources/profiles/Elegoo/machine/EC/Elegoo Centauri.json

@@ -8,5 +8,5 @@
   "bed_model": "elegoo_C_buildplate_model.stl",
   "bed_texture": "",
   "hotend_model": "",
-  "default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @EC;Elegoo RAPID PETG+ @0.2 nozzle;Elegoo RAPID PETG+ @EC;Elegoo RAPID PLA @0.2 nozzle;Elegoo RAPID PLA @EC;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @EC;Elegoo TPU 95A @EC"
+  "default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @EC;Elegoo RAPID PETG+;;Elegoo RAPID PLA+ @EC;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @EC;Elegoo TPU 95A @EC"
 }

resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon.json

@@ -8,5 +8,5 @@
   "bed_model": "elegoo_CC_buildplate_model.stl",
   "bed_texture": "",
   "hotend_model": "",
-  "default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @ECC;Elegoo RAPID PETG+ @0.2 nozzle;Elegoo RAPID PETG+ @ECC;Elegoo RAPID PLA @0.2 nozzle;Elegoo RAPID PLA @ECC;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @ECC;Elegoo TPU 95A @ECC"
+  "default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @ECC;Elegoo RAPID PETG+;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @ECC;Elegoo TPU 95A @ECC"
 }

resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.2 nozzle).json

@@ -51,7 +51,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.2 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.4 nozzle).json

@@ -51,7 +51,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.4 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.6 nozzle).json

@@ -51,7 +51,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.6 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 (0.8 nozzle).json

@@ -51,7 +51,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.8 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.2 nozzle).json

@@ -78,7 +78,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.2 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.4 nozzle).json

@@ -78,7 +78,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.4 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.6 nozzle).json

@@ -78,7 +78,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.6 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max (0.8 nozzle).json

@@ -78,7 +78,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.8 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Max.json

@@ -9,5 +9,5 @@
     "bed_texture": "elegoo_neptune_max_buildplate_texture.png",
     "bed_exclude_area": ["0x0"],
     "hotend_model": "",
-	"default_materials": "Elegoo Generic PLA @0.2 nozzle;Elegoo Generic PETG @0.2 nozzle;Elegoo Generic ABS @0.2 nozzle;Elegoo Generic PLA @0.4 nozzle;Elegoo Generic PETG @0.4 nozzle;Elegoo Generic ABS @0.4 nozzle;Elegoo Generic PLA @0.6 nozzle;Elegoo Generic PETG @0.6 nozzle;Elegoo Generic ABS @0.6 nozzle;Elegoo Generic PLA @0.8 nozzle;Elegoo Generic PETG @0.8 nozzle;Elegoo Generic ABS @0.8 nozzle"
+	"default_materials": "Elegoo Generic PLA;Elegoo Generic PETG;Elegoo Generic ABS"
 }

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Plus (0.2 nozzle).json

@@ -84,7 +84,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.2 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Plus (0.4 nozzle).json

@@ -84,7 +84,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.4 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",

resources/profiles/Elegoo/machine/Elegoo Neptune 4 Plus (0.6 nozzle).json

@@ -84,7 +84,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Elegoo Generic PLA @0.6 nozzle"
+		"Elegoo Generic PLA"
 	],
 	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
 	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",