diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PA-CF.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PA-CF.json
index 7a59fc58751..faf2f476cfa 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PA-CF.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PA-CF.json	
@@ -9,15 +9,24 @@
     "filament_type": [
         "PA-CF"
     ],
-    "nozzle_temperature_initial_layer": [
-        "280"
-    ],
-    "nozzle_temperature": [
-        "280"
-    ],
     "filament_max_volumetric_speed": [
         "8"
     ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_wipe": [
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "4"
+    ],
+    "filament_retract_before_wipe": [
+        "0%"
+    ],
+    "filament_retraction_length": [
+        "0.8"
+    ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle"
 
diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PC.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PC.json
index d8486c08e34..f60cff0f63b 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PC.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PC.json	
@@ -10,7 +10,13 @@
         "12"
     ],
     "filament_flow_ratio": [
-        "0.931"
+        "0.94"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.058"
     ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle"
diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json
index 1257a0c6cdf..a02f0f5c9ad 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json	
@@ -19,7 +19,7 @@
         "90"
     ],
     "overhang_fan_threshold": [
-        "25%"
+        "10%"
     ],
     "fan_max_speed": [
         "90"
@@ -34,7 +34,7 @@
         "8"
     ],
     "filament_flow_ratio": [
-        "0.931"
+        "0.94"
     ],
     "filament_max_volumetric_speed": [
         "12"
@@ -42,6 +42,12 @@
     "filament_start_gcode": [
         "; filament start gcode\n"
     ],
+    "enable_pressure_advance": [
+        "1"
+      ],
+      "pressure_advance": [
+        "0.084"
+      ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle"
     ]
diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json
index ef7dcfc96ac..f873512b357 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json	
@@ -7,14 +7,17 @@
     "instantiation": "true",
     "inherits": "fdm_filament_pla",
     "filament_flow_ratio": [
-        "0.931"
+        "0.94"
     ],
     "filament_max_volumetric_speed": [
-        "26"
+        "12"
     ],
     "slow_down_layer_time": [
         "8"
     ],
+    "pressure_advance": [
+        "0.084"
+    ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle"
     ]
diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic TPU.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic TPU.json
index a2fe4bff860..f369b553942 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic TPU.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic TPU.json	
@@ -7,7 +7,16 @@
     "instantiation": "true",
     "inherits": "fdm_filament_tpu",
     "filament_max_volumetric_speed": [
-        "3.2"
+      "3"
+    ],
+    "filament_flow_ratio": [
+      "0.94"
+    ],
+    "enable_pressure_advance": [
+      "1"
+    ],
+    "pressure_advance": [
+     "0.13"
     ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle"
diff --git a/resources/profiles/FlyingBear/filament/FlyingBear PLA Hyper.json b/resources/profiles/FlyingBear/filament/FlyingBear PLA Hyper.json
new file mode 100644
index 00000000000..82a1e11c275
--- /dev/null
+++ b/resources/profiles/FlyingBear/filament/FlyingBear PLA Hyper.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "FlyingBear PLA Hyper",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla_Hyper",
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "25"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ],
+    "compatible_printers": [
+      "FlyingBear Reborn3 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_common.json b/resources/profiles/FlyingBear/filament/fdm_filament_common.json
index e8244c65c41..b3f613e8ec1 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_common.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_common.json
@@ -28,7 +28,7 @@
         "60"
     ],
     "overhang_fan_threshold": [
-        "95%"
+        "0%"
     ],
     "overhang_fan_speed": [
         "100"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pa.json b/resources/profiles/FlyingBear/filament/fdm_filament_pa.json
index cbfa23c1000..79003f41294 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pa.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pa.json
@@ -4,6 +4,9 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
     "cool_plate_temp" : [
         "0"
     ],
@@ -14,19 +17,19 @@
         "110"
     ],
     "textured_plate_temp" : [
-        "100"
+        "110"
     ],
     "cool_plate_temp_initial_layer" : [
         "0"
     ],
     "eng_plate_temp_initial_layer" : [
-        "100"
+        "110"
     ],
     "hot_plate_temp_initial_layer" : [
-        "100"
+        "110"
     ],
     "textured_plate_temp_initial_layer" : [
-        "100"
+        "110"
     ],
     "slow_down_for_layer_cooling": [
         "1"
@@ -50,7 +53,7 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "280"
+        "240"
     ],
     "reduce_fan_stop_start_freq": [
         "0"
@@ -65,20 +68,26 @@
         "40"
     ],
     "nozzle_temperature": [
-        "280"
+        "240"
     ],
     "temperature_vitrification": [
         "108"
     ],
     "nozzle_temperature_range_low": [
-        "270"
+        "240"
     ],
     "nozzle_temperature_range_high": [
-        "300"
+        "280"
     ],
     "slow_down_min_speed": [
         "20"
     ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "60"
+    ],
     "slow_down_layer_time": [
         "2"
     ]
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pc.json b/resources/profiles/FlyingBear/filament/fdm_filament_pc.json
index d75eeaf55dc..589ae19b4e8 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pc.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pc.json
@@ -4,6 +4,9 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
     "cool_plate_temp" : [
         "0"
     ],
@@ -82,6 +85,12 @@
     "slow_down_min_speed": [
         "20"
     ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "60"
+    ],
     "slow_down_layer_time": [
         "2"
     ]
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pet.json b/resources/profiles/FlyingBear/filament/fdm_filament_pet.json
index 9b5735fa904..389942acf7e 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pet.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pet.json
@@ -4,6 +4,9 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
     "cool_plate_temp" : [
         "60"
     ],
@@ -11,7 +14,7 @@
         "0"
     ],
     "hot_plate_temp" : [
-        "70"
+        "75"
     ],
     "textured_plate_temp" : [
         "80"
@@ -23,7 +26,7 @@
         "0"
     ],
     "hot_plate_temp_initial_layer" : [
-        "70"
+        "75"
     ],
     "textured_plate_temp_initial_layer" : [
         "80"
@@ -71,10 +74,13 @@
         "80"
     ],
     "nozzle_temperature_range_low": [
-        "220"
+        "200"
     ],
     "nozzle_temperature_range_high": [
-        "260"
+        "280"
+    ],
+    "additional_cooling_fan_speed": [
+        "100"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
index 8ef68484230..f1fe0ff99b5 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
@@ -4,11 +4,14 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
     "fan_cooling_layer_time": [
-        "80"
+        "100"
     ],
     "filament_max_volumetric_speed": [
-        "26"
+        "12"
     ],
     "filament_type": [
         "PLA"
@@ -38,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "60"
+        "65"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
@@ -56,7 +59,7 @@
         "100"
     ],
     "fan_min_speed": [
-        "50"
+        "100"
     ],
     "overhang_fan_speed": [
         "100"
@@ -68,7 +71,7 @@
         "1"
     ],
     "nozzle_temperature": [
-        "200"
+        "195"
     ],
     "temperature_vitrification": [
         "60"
@@ -86,7 +89,7 @@
         "8"
     ],
     "additional_cooling_fan_speed": [
-        "70"
+        "100"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
new file mode 100644
index 00000000000..4a3150818ab
--- /dev/null
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
@@ -0,0 +1,97 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla_Hyper",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "textured_plate_temp" : [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "195"
+    ],
+    "temperature_vitrification": [
+        "60"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "nozzle_temperature_range_high": [
+        "230"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "additional_cooling_fan_speed": [
+        "100"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json b/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json
index 012be60aba7..6a335be746d 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_tpu.json
@@ -4,6 +4,9 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
     "cool_plate_temp" : [
         "30"
     ],
@@ -43,9 +46,7 @@
     "filament_cost": [
         "20"
     ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
+
     "nozzle_temperature_initial_layer": [
         "210"
     ],
@@ -65,7 +66,7 @@
         "100"
     ],
     "additional_cooling_fan_speed": [
-        "70"
+        "100"
     ],
     "close_fan_the_first_x_layers": [
         "1"
@@ -82,6 +83,15 @@
     "nozzle_temperature_range_high": [
         "250"
     ],
+    "filament_z_hop": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n"
     ]