-
-
Notifications
You must be signed in to change notification settings - Fork 1.1k
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Add Artillery Genius Pro Profile (#3742)
* add photos required for genius pro * add genius pro * add genius pro * add genius pro * added genius pro, changed bed temp to 60c, nozzle temp 200c * add genius pro, changed bed temp 60c, nozzle temp 200c * add genius pro * add genius pro and 0.4mm nozzle * elafant foot to 0.15mm, 2 walls * add genius pro print settings * add genius pro paths
- Loading branch information
Showing
16 changed files
with
502 additions
and
2 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
Binary file added
BIN
+5.36 KB
resources/profiles/Artillery/artillery_geniuspro_buildplate_model.stl
Binary file not shown.
Binary file added
BIN
+7.54 KB
resources/profiles/Artillery/artillery_geniuspro_buildplate_texture.png
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
114 changes: 114 additions & 0 deletions
114
resources/profiles/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,114 @@ | ||
| { | ||
| "type": "machine", | ||
| "setting_id": "GM003", | ||
| "name": "Artillery Genius Pro 0.4 nozzle", | ||
| "from": "system", | ||
| "instantiation": "true", | ||
| "inherits": "fdm_machine_common", | ||
| "printer_model": "Artillery Genius Pro", | ||
| "default_print_profile": "0.20mm Standard @Artillery Genius Pro", | ||
| "nozzle_diameter": [ | ||
| "0.4" | ||
| ], | ||
| "bed_exclude_area": [ | ||
| "0x0" | ||
| ], | ||
| "printable_area": [ | ||
| "0x0", | ||
| "230x0", | ||
| "230x230", | ||
| "0x230" | ||
| ], | ||
| "printable_height": "250", | ||
| "nozzle_type": "hardened_steel", | ||
| "auxiliary_fan": "0", | ||
| "machine_max_acceleration_extruding": [ | ||
| "1000", | ||
| "1250" | ||
| ], | ||
| "machine_max_acceleration_retracting": [ | ||
| "1000", | ||
| "1250" | ||
| ], | ||
| "machine_max_acceleration_travel": [ | ||
| "1000", | ||
| "1250" | ||
| ], | ||
| "machine_max_acceleration_x": [ | ||
| "2000", | ||
| "1000" | ||
| ], | ||
| "machine_max_acceleration_y": [ | ||
| "2000", | ||
| "1000" | ||
| ], | ||
| "machine_max_acceleration_z": [ | ||
| "500", | ||
| "200" | ||
| ], | ||
| "machine_max_speed_e": [ | ||
| "120", | ||
| "120" | ||
| ], | ||
| "machine_max_speed_x": [ | ||
| "500", | ||
| "200" | ||
| ], | ||
| "machine_max_speed_y": [ | ||
| "500", | ||
| "200" | ||
| ], | ||
| "machine_max_speed_z": [ | ||
| "12", | ||
| "12" | ||
| ], | ||
| "machine_max_jerk_e": [ | ||
| "3", | ||
| "2.5" | ||
| ], | ||
| "machine_max_jerk_x": [ | ||
| "7", | ||
| "10" | ||
| ], | ||
| "machine_max_jerk_y": [ | ||
| "7", | ||
| "10" | ||
| ], | ||
| "machine_max_jerk_z": [ | ||
| "0.2", | ||
| "0.4" | ||
| ], | ||
| "max_layer_height": [ | ||
| "0.32" | ||
| ], | ||
| "min_layer_height": [ | ||
| "0.08" | ||
| ], | ||
| "printer_settings_id": "Artillery", | ||
| "retraction_minimum_travel": [ | ||
| "2" | ||
| ], | ||
| "retract_before_wipe": [ | ||
| "0%" | ||
| ], | ||
| "retraction_length": [ | ||
| "2.2" | ||
| ], | ||
| "retract_length_toolchange": [ | ||
| "10" | ||
| ], | ||
| "deretraction_speed": [ | ||
| "0" | ||
| ], | ||
| "single_extruder_multi_material": "1", | ||
| "change_filament_gcode": "", | ||
| "machine_pause_gcode": "M0", | ||
| "default_filament_profile": [ | ||
| "Artillery Generic PLA" | ||
| ], | ||
| "machine_start_gcode": "M83; extruder relative mode\nG28; home all axes\nG29 S12000; bed mesh leveling\nM104 S[nozzle_temperature_initial_layer]; set hotend temperature\nM140 S[bed_temperature_initial_layer_single]; set heatbed temperature\nG90; Absolute Positioning\nG1 Y0 F5000; Move to front\nG1 X0 F5000; Move to origin\nM190 S[bed_temperature_initial_layer_single]; wait for the bed to heat up\nM109 S[nozzle_temperature_initial_layer]; wait for the extruder to heat up\nG92 E0; reset extruder\nG1 X20 Y5 Z0.3 F5000.0; move to start-line position\nG1 Z0.3 F1000; print height\nG1 X200 Y5 F1500.0 E15; draw 1st line\nG1 X200 Y5.3 Z0.3 F5000.0; move to side a little\nG1 X5.3 Y5.3 Z0.3 F1500.0 E30; draw 2nd line\nG1 Z3 F3000; move z up little to prevent scratching of surface", | ||
| "machine_end_gcode": "G91; Relative positionning\nG1 E-2 Z0.2 F2400; Retract and raise Z\nG1 X5 Y5 F3000; Wipe out\nG1 Z10; Raise Z more\nG90; Absolute positionning\nG1 X0 Y100; Present print\nM106 S0; Turn-off fan\nM104 S0; Turn-off hotend\nM140 S0; Turn-off bed\nM84 X Y E; Disable all steppers but Z", | ||
| "layer_change_gcode": "", | ||
| "scan_first_layer": "0" | ||
| } | ||
|
|
12 changes: 12 additions & 0 deletions
12
resources/profiles/Artillery/machine/Artillery Genius Pro.json
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,12 @@ | ||
| { | ||
| "type": "machine_model", | ||
| "name": "Artillery Genius Pro", | ||
| "model_id": "Artillery-Genius-Pro", | ||
| "nozzle_diameter": "0.4", | ||
| "machine_tech": "FFF", | ||
| "family": "Artillery", | ||
| "bed_model": "artillery_geniuspro_buildplate_model.stl", | ||
| "bed_texture": "artillery_geniuspro_buildplate_texture.png", | ||
| "hotend_model": "", | ||
| "default_materials": "Artillery Generic ABS;Artillery Generic PLA;Artillery Generic PLA-CF;Artillery Generic PETG;Artillery Generic TPU;Artillery Generic ASA" | ||
| } |
108 changes: 108 additions & 0 deletions
108
resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,108 @@ | ||
| { | ||
| "type": "process", | ||
| "setting_id": "GP004", | ||
| "name": "0.15mm Optimal @Artillery Genius Pro", | ||
| "from": "system", | ||
| "instantiation": "true", | ||
| "inherits": "fdm_process_common", | ||
| "adaptive_layer_height": "1", | ||
| "reduce_crossing_wall": "0", | ||
| "layer_height": "0.15", | ||
| "max_travel_detour_distance": "0", | ||
| "bottom_surface_pattern": "monotonic", | ||
| "bottom_shell_layers": "3", | ||
| "bottom_shell_thickness": "0", | ||
| "bridge_flow": "1", | ||
| "bridge_speed": "70", | ||
| "brim_width": "0", | ||
| "brim_object_gap": "0", | ||
| "compatible_printers_condition": "", | ||
| "print_sequence": "by layer", | ||
| "default_acceleration": "0", | ||
| "top_surface_acceleration": "0", | ||
| "bridge_no_support": "0", | ||
| "draft_shield": "disabled", | ||
| "elefant_foot_compensation": "0.15", | ||
| "enable_arc_fitting": "0", | ||
| "outer_wall_line_width": "0.4", | ||
| "wall_infill_order": "inner wall/outer wall/infill", | ||
| "line_width": "0.5", | ||
| "infill_direction": "45", | ||
| "sparse_infill_density": "15%", | ||
| "sparse_infill_pattern": "grid", | ||
| "initial_layer_acceleration": "0", | ||
| "travel_acceleration": "0", | ||
| "inner_wall_acceleration": "0", | ||
| "initial_layer_line_width": "0.5", | ||
| "initial_layer_print_height": "0.25", | ||
| "infill_combination": "0", | ||
| "sparse_infill_line_width": "0.45", | ||
| "infill_wall_overlap": "15%", | ||
| "interface_shells": "0", | ||
| "ironing_flow": "15%", | ||
| "ironing_spacing": "0.1", | ||
| "ironing_speed": "15", | ||
| "ironing_type": "no ironing", | ||
| "reduce_infill_retraction": "1", | ||
| "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", | ||
| "detect_overhang_wall": "1", | ||
| "overhang_1_4_speed": "0", | ||
| "overhang_2_4_speed": "20", | ||
| "overhang_3_4_speed": "15", | ||
| "overhang_4_4_speed": "10", | ||
| "inner_wall_line_width": "0.45", | ||
| "wall_loops": "2", | ||
| "print_settings_id": "", | ||
| "raft_layers": "0", | ||
| "seam_position": "aligned", | ||
| "skirt_distance": "2", | ||
| "skirt_height": "1", | ||
| "skirt_loops": "3", | ||
| "minimum_sparse_infill_area": "10", | ||
| "internal_solid_infill_line_width": "0", | ||
| "spiral_mode": "0", | ||
| "standby_temperature_delta": "-5", | ||
| "enable_support": "0", | ||
| "resolution": "0.012", | ||
| "support_type": "normal(auto)", | ||
| "support_style": "grid", | ||
| "support_on_build_plate_only": "0", | ||
| "support_top_z_distance": "0.15", | ||
| "support_filament": "0", | ||
| "support_line_width": "0.4", | ||
| "support_interface_loop_pattern": "1", | ||
| "support_interface_filament": "0", | ||
| "support_interface_top_layers": "3", | ||
| "support_interface_bottom_layers": "-1", | ||
| "support_interface_spacing": "1", | ||
| "support_interface_speed": "100%", | ||
| "support_base_pattern": "rectilinear", | ||
| "support_base_pattern_spacing": "2.5", | ||
| "support_speed": "60", | ||
| "support_threshold_angle": "30", | ||
| "support_object_xy_distance": "50%", | ||
| "tree_support_branch_angle": "40", | ||
| "tree_support_wall_count": "0", | ||
| "detect_thin_wall": "1", | ||
| "top_surface_pattern": "monotonic", | ||
| "top_surface_line_width": "0.4", | ||
| "top_shell_layers": "4", | ||
| "top_shell_thickness": "0.8", | ||
| "initial_layer_speed": "35%", | ||
| "initial_layer_infill_speed": "35%", | ||
| "outer_wall_speed": "60", | ||
| "inner_wall_speed": "60", | ||
| "internal_solid_infill_speed": "30", | ||
| "top_surface_speed": "30", | ||
| "gap_infill_speed": "30", | ||
| "sparse_infill_speed": "60", | ||
| "travel_speed": "110", | ||
| "enable_prime_tower": "0", | ||
| "wipe_tower_no_sparse_layers": "0", | ||
| "prime_tower_width": "60", | ||
| "xy_hole_compensation": "0", | ||
| "xy_contour_compensation": "0", | ||
| "compatible_printers": [ | ||
| "Artillery Genius Pro 0.4 nozzle" | ||
| ] | ||
| } |
Oops, something went wrong.