Starts and immedialtely crash (Linux version)

[Zebulon67fr]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.2.0 Linux ubuntu appmimage

Operating System (OS)

Linux

OS Version

Linux Mint 22 Wilma base: Ubuntu 24.04 noble

Additional system information

Machine:
Type: Laptop System: ASUSTeK product: ROG Strix G513RC_G513RC v: 1.0 serial:
Mobo: ASUSTeK model: G513RC v: 1.0 serial: uuid:
UEFI: American Megatrends LLC. v: G513RC.327 date: 02/16/2023
CPU:
Info: 8-core model: AMD Ryzen 7 6800H with Radeon Graphics bits: 64 type: MT MCP smt: enabled
arch: Zen 3+ rev: 1 cache: L1: 512 KiB L2: 4 MiB L3: 16 MiB
Speed (MHz): avg: 1905 high: 4566 min/max: 400/4785 cores: 1: 4566 2: 4565 3: 400 4: 400
5: 2283 6: 2118 7: 2029 8: 400 9: 2285 10: 2248 11: 400 12: 400 13: 2030 14: 400 15: 2029
16: 3932 bogomips: 102211
NVIDIA GA107M [GeForce RTX 3050 Mobile

Printer

proforge 4 makertech and snapmaker J1

How to reproduce

Launch the programme (appimage)
Orcaslicer opens and shows all my recent project.
Then stops (closes) without any message.

Actual results

no message. Need to lauch again and same result

Expected results

was working before so should keep working

Project file & Debug log uploads

log.zip

Checklist of files to include

• Log file
• Project file

Anything else?

I have no clue . It worked perfect until I decide to connect my printer proforge 4 via my network. Test was OK in orcaslicer whith its IP. I can reach the printer without any issue using its IP in a browser. But since this setting orcaslicer refuses to work.

[dkowis]

I have the same problem right now, I have a pair of Voron printers.

Here's my log file. I see a webkit bug with a timer, but I'm not sure that's the actual problem.
crash-popOS-02Oct2024.zip

Of note, I have an nvidia graphics card, and if I launch using:
__EGL_VENDOR_LIBRARY_FILENAMES=/usr/share/glvnd/egl_vendor.d/50_mesa.json ./OrcaSlicer.AppImage it does indeed load, but I lose all 3d acceleration, and so it's very difficult to use after something has been sliced.

Oh hey, I found segfaults in dmesg from orcaslicer:

[824647.491042] orcaslicer_main[2523979]: segfault at 0 ip 000076ee7dd03116 sp 00007ffedefdc988 error 4 in libwebkit2gtk-4.0.so.37.71.3[76ee7d64d000+3546000] likely on CPU 30 (core 14, socket 0)
[824647.491067] Code: 00 00 00 00 48 c7 40 2c 00 00 00 00 c7 40 34 00 00 00 00 c3 f3 0f 1e fa 48 8b 47 28 48 8d 15 91 c3 ff ff 48 8b b8 68 01 00 00 <48> 8b 07 48 8b 40 10 48 39 d0 75 06 c3 0f 1f 44 00 00 ff e0 66 0f
[824658.922587] orcaslicer_main[2524498]: segfault at 0 ip 00007dc574703116 sp 00007ffcd0e093a8 error 4 in libwebkit2gtk-4.0.so.37.71.3[7dc57404d000+3546000] likely on CPU 13 (core 13, socket 0)
[824658.922605] Code: 00 00 00 00 48 c7 40 2c 00 00 00 00 c7 40 34 00 00 00 00 c3 f3 0f 1e fa 48 8b 47 28 48 8d 15 91 c3 ff ff 48 8b b8 68 01 00 00 <48> 8b 07 48 8b 40 10 48 39 d0 75 06 c3 0f 1f 44 00 00 ff e0 66 0f
[824670.120610] orcaslicer_main[2524881]: segfault at 0 ip 0000750301503116 sp 00007ffd46337698 error 4 in libwebkit2gtk-4.0.so.37.71.3[750300e4d000+3546000] likely on CPU 4 (core 4, socket 0)
[824670.120642] Code: 00 00 00 00 48 c7 40 2c 00 00 00 00 c7 40 34 00 00 00 00 c3 f3 0f 1e fa 48 8b 47 28 48 8d 15 91 c3 ff ff 48 8b b8 68 01 00 00 <48> 8b 07 48 8b 40 10 48 39 d0 75 06 c3 0f 1f 44 00 00 ff e0 66 0f
[824761.298861] orcaslicer_main[2525613]: segfault at 0 ip 000075bc4a703116 sp 00007ffd1513d8d8 error 4 in libwebkit2gtk-4.0.so.37.71.3[75bc4a04d000+3546000] likely on CPU 4 (core 4, socket 0)
[824761.298889] Code: 00 00 00 00 48 c7 40 2c 00 00 00 00 c7 40 34 00 00 00 00 c3 f3 0f 1e fa 48 8b 47 28 48 8d 15 91 c3 ff ff 48 8b b8 68 01 00 00 <48> 8b 07 48 8b 40 10 48 39 d0 75 06 c3 0f 1f 44 00 00 ff e0 66 0f
[824772.506063] orcaslicer_main[2526003]: segfault at 0 ip 0000744815d03116 sp 00007ffcc6bb4158 error 4 in libwebkit2gtk-4.0.so.37.71.3[74481564d000+3546000] likely on CPU 31 (core 15, socket 0)
[824772.506080] Code: 00 00 00 00 48 c7 40 2c 00 00 00 00 c7 40 34 00 00 00 00 c3 f3 0f 1e fa 48 8b 47 28 48 8d 15 91 c3 ff ff 48 8b b8 68 01 00 00 <48> 8b 07 48 8b 40 10 48 39 d0 75 06 c3 0f 1f 44 00 00 ff e0 66 0f
[824812.281147] orcaslicer_main[2526539]: segfault at 0 ip 00007ac585d03116 sp 00007ffc9db0a598 error 4 in libwebkit2gtk-4.0.so.37.71.3[7ac58564d000+3546000] likely on CPU 25 (core 9, socket 0)
[824812.281173] Code: 00 00 00 00 48 c7 40 2c 00 00 00 00 c7 40 34 00 00 00 00 c3 f3 0f 1e fa 48 8b 47 28 48 8d 15 91 c3 ff ff 48 8b b8 68 01 00 00 <48> 8b 07 48 8b 40 10 48 39 d0 75 06 c3 0f 1f 44 00 00 ff e0 66 0f

[dkowis]

Running it with strace:

--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=NULL} ---
rt_sigaction(SIGSEGV, {sa_handler=SIG_DFL, sa_mask=~[RTMIN RT_1], sa_flags=SA_RESTORER, sa_restorer=0x758dd2a42520}, NULL, 8) = 0
rt_sigreturn({mask=[]})                 = 108625863308720
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=NULL} ---
+++ killed by SIGSEGV (core dumped) +++
fish: Job 1, 'strace build/package/bin/orca-s…' terminated by signal SIGSEGV (Address boundary error)

[alex999888777]

#7210 (comment)

[dkowis]

#7210 (comment)

Thank you so much @alex999888777 :D Setting the ip:port in the JSON files instead of just the direct IP solved the issue entirely!

[Zebulon67fr]

Now this is a message when I lauch Orca

[Zebulon67fr]

Thank you. This is now solved Le 2 novembre 2024 20:18:51 David Kowis ***@***.***> a écrit :

…

#7210 (comment) Thank you so much @alex999888777 :D Setting the ip:port in the JSON files instead of just the direct IP solved the issue entirely! — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

[rynoian]

freezes at the setup wizard

[schenlap]

I had the same issue on debian. I start it now with
env WEBKIT_DISABLE_COMPOSITING_MODE=1 ./OrcaSlicer_Linux_V2.2.0.appimage
and it works for me.