Add Flashforge Adventurer 4 Printer Profile

resources/profiles/Flashforge.json

@@ -21,6 +21,10 @@
       "name": "Flashforge Adventurer 3 Series",
       "sub_path": "machine/Flashforge Adventurer 3 Series.json"
     },
+    {
+      "name": "Flashforge Adventurer 4 Series",
+      "sub_path": "machine/Flashforge Adventurer 4 Series.json"
+    },  
     {
       "name": "Flashforge Guider 3 Ultra",
       "sub_path": "machine/Flashforge Guider 3 Ultra.json"
@@ -175,6 +179,26 @@
       "name": "0.30mm Standard @Flashforge AD3 0.6 Nozzle",
       "sub_path": "process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json"
     },
+ {
+      "name": "0.13mm Standard @Flashforge AD4 0.3 Nozzle",
+      "sub_path": "process/0.13mm Standard @Flashforge AD4 0.3 Nozzle.json"
+    },
+    {
+      "name": "0.20mm Standard @Flashforge AD4 0.4 Nozzle",
+      "sub_path": "process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json"
+    },
+    {
+      "name": "0.30mm Fast @Flashforge AD4 0.4 Nozzle",
+      "sub_path": "process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json"
+    },	  
+    {
+      "name": "0.20mm High-Speed @Flashforge AD4 HS Nozzle",
+      "sub_path": "process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json"
+    },
+    {
+      "name": "0.30mm Standard @Flashforge AD4 0.6 Nozzle",
+      "sub_path": "process/0.30mm Standard @Flashforge AD4 0.6 Nozzle.json"
+    },
     {
       "name": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
       "sub_path": "process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json"
@@ -493,6 +517,42 @@
       "name": "Flashforge Generic PVA",
       "sub_path": "filament/Flashforge Generic PVA.json"
     },
+    {
+      "name": "Generic ABS @Flashforge AD4",
+      "sub_path": "filament/Generic ABS @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic ASA @AD4",
+      "sub_path": "filament/Generic ASA @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic PLA High Speed @Flashforge AD4",
+      "sub_path": "filament/Generic PLA High Speed @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic PETG @Flashforge AD4",
+      "sub_path": "filament/Generic PETG @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic PETG-CF10 @Flashforge AD4",
+      "sub_path": "filament/Generic PETG-CF10 @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic PLA @Flashforge AD4",
+      "sub_path": "filament/Generic PLA @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic PLA-CF10 @Flashforge AD4",
+      "sub_path": "filament/Generic PLA-CF10 @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic PLA Silk @Flashforge AD4",
+      "sub_path": "filament/Generic PLA Silk @Flashforge AD4.json"
+    },
+    {
+      "name": "Generic TPU @Flashforge AD4",
+      "sub_path": "filament/Generic TPU @Flashforge AD4.json"
+    },    
     {
 		"name": "SUNLU PLA Matte @base",
 		"sub_path": "filament/SUNLU/SUNLU PLA Matte @base.json"
@@ -659,6 +719,26 @@
       "name": "Flashforge Adventurer 3 Series 0.6 Nozzle",
       "sub_path": "machine/Flashforge Adventurer 3 Series 0.6 nozzle.json"
     },
+    {
+      "name": "fdm_adventurer4_common",
+      "sub_path": "machine/fdm_adventurer4_common.json"
+    },
+    {
+      "name": "Flashforge Adventurer 4 Series 0.3 Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 4 Series 0.3 nozzle.json"
+    },
+    {
+      "name": "Flashforge Adventurer 4 Series 0.4 Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 4 Series 0.4 nozzle.json"
+    },
+    {
+      "name": "Flashforge Adventurer 4 Series 0.6 Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 4 Series 0.6 nozzle.json"
+    },
+    {
+      "name": "Flashforge Adventurer 4 Series HS Nozzle",
+      "sub_path": "machine/Flashforge Adventurer 4 Series HS nozzle.json"
+    },    
     {
       "name": "fdm_guider3_common",
       "sub_path": "machine/fdm_guider3_common.json"

resources/profiles/Flashforge/filament/Generic ABS @Flashforge AD4.json

@@ -0,0 +1,67 @@
+{
+  "type": "filament",
+  "filament_id": "GFB99",
+  "setting_id": "GFSA04",
+  "name": "Generic ABS @Flashforge AD4",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "Flashforge Generic ABS",
+  "filament_flow_ratio": [
+    "1.093"
+  ],
+  "filament_max_volumetric_speed": [
+    "15"
+  ],
+  "slow_down_layer_time": [
+    "8"
+  ],
+  "support_material_interface_fan_speed": [
+    "80"
+  ],
+  "slow_down_min_speed": [
+    "20"
+  ],  "chamber_temperature": [
+    "40"
+  ],
+  "filament_start_gcode": [
+    "; filament start gcode\n;right_extruder_material: ABS\n"
+  ],
+  "filament_end_gcode": [
+    "; filament end gcode\n"
+  ],
+  "filament_diameter": [
+    "1.75"
+  ],
+  "enable_pressure_advance": [
+    "1"
+  ],
+  "pressure_advance": [
+    "0.04"
+  ],
+  "filament_density": [
+    "1.04"
+  ],
+  "nozzle_temperature_initial_layer": [
+    "240"
+  ],
+  "nozzle_temperature": [
+    "240"
+  ],  
+  "temperature_vitrification": [
+    "100"
+  ],
+  "hot_plate_temp_initial_layer": [
+    "105"
+  ],
+  "hot_plate_temp": [
+    "105"
+  ],
+  "compatible_printers": [
+    "Flashforge Adventurer 4 Series 0.3 Nozzle",
+    "Flashforge Adventurer 4 Series 0.4 Nozzle",
+    "Flashforge Adventurer 4 Series 0.6 Nozzle"
+  ],
+  "filament_vendor": [
+    "Generic"
+  ]
+}

resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json

@@ -0,0 +1,189 @@
+{
+  "type": "filament",
+  "filament_id": "GFL99",
+  "setting_id": "GFSA04",
+  "name": "Generic ASA @Flashforge AD4",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "Flashforge Generic ASA",
+  "additional_cooling_fan_speed": [
+    "0"
+  ],
+  "bed_temperature_difference": [
+    "10"
+  ],
+  "chamber_temperature": "40",
+  "close_fan_the_first_x_layers": [
+    "2"
+  ],
+  "compatible_printers": [
+    "Flashforge Adventurer 4 Series 0.3 Nozzle",
+    "Flashforge Adventurer 4 Series 0.4 Nozzle",
+    "Flashforge Adventurer 4 Series 0.6 Nozzle"
+  ],
+  "compatible_printers_condition": "",
+  "compatible_prints": [],
+  "compatible_prints_condition": "",
+  "cool_plate_temp": [
+    "60"
+  ],
+  "cool_plate_temp_initial_layer": [
+    "60"
+  ],
+  "default_filament_colour": [
+    ""
+  ],
+  "enable_overhang_bridge_fan": [
+    "1"
+  ],
+  "enable_pressure_advance": [
+    "1"
+  ],
+  "eng_plate_temp": [
+    "60"
+  ],
+  "eng_plate_temp_initial_layer": [
+    "60"
+  ],
+  "fan_cooling_layer_time": [
+    "30"
+  ],
+  "fan_max_speed": [
+    "20"
+  ],
+  "fan_min_speed": [
+    "10"
+  ],
+  "filament_cost": [
+    "20"
+  ],
+  "filament_density": [
+    "1.04"
+  ],
+  "filament_deretraction_speed": [
+    "nil"
+  ],
+  "filament_diameter": [
+    "1.75"
+  ],
+  "filament_flow_ratio": [
+    "1.093"
+  ],
+  "filament_is_support": [
+    "0"
+  ],
+  "filament_max_volumetric_speed": [
+    "18"
+  ],
+  "filament_minimal_purge_on_wipe_tower": [
+    "15"
+  ],
+  "filament_retract_before_wipe": [
+    "nil"
+  ],
+  "filament_retract_restart_extra": [
+    "nil"
+  ],
+  "filament_retract_when_changing_layer": [
+    "nil"
+  ],
+  "filament_retraction_length": [
+    "nil"
+  ],
+  "filament_retraction_minimum_travel": [
+    "nil"
+  ],
+  "filament_retraction_speed": [
+    "nil"
+  ],
+  "filament_settings_id": [
+    "Flashforge  ASA"
+  ],
+  "filament_shrink": [
+    "100%"
+  ],
+  "filament_soluble": [
+    "0"
+  ],
+  "filament_start_gcode": [
+    "; filament start gcode \n;right_extruder_material:ASA"
+  ],
+  "filament_end_gcode": [
+    "; filament end gcode\n"
+  ],
+  "filament_type": [
+    "ASA"
+  ],
+  "filament_vendor": [
+    "Generic"
+  ],
+  "filament_wipe": [
+    "nil"
+  ],
+  "filament_wipe_distance": [
+    "nil"
+  ],
+  "filament_z_hop": [
+    "nil"
+  ],
+  "filament_z_hop_types": [
+    "nil"
+  ],
+  "full_fan_speed_layer": [
+    "0"
+  ],
+  "hot_plate_temp": [
+    "105"
+  ],
+  "hot_plate_temp_initial_layer": [
+    "105"
+  ],
+  "nozzle_temperature": [
+    "250"
+  ],
+  "nozzle_temperature_initial_layer": [
+    "250"
+  ],
+  "nozzle_temperature_range_high": [
+    "270"
+  ],
+  "nozzle_temperature_range_low": [
+    "230"
+  ],
+  "overhang_fan_speed": [
+    "80"
+  ],
+  "overhang_fan_threshold": [
+    "25%"
+  ],
+  "pressure_advance": [
+    "0.04"
+  ],
+  "reduce_fan_stop_start_freq": [
+    "1"
+  ],
+  "required_nozzle_HRC": [
+    "0"
+  ],
+  "slow_down_for_layer_cooling": [
+    "1"
+  ],
+  "slow_down_layer_time": [
+    "5"
+  ],
+  "slow_down_min_speed": [
+    "20"
+  ],
+  "support_material_interface_fan_speed": [
+    "80"
+  ],
+  "temperature_vitrification": [
+    "100"
+  ],
+  "textured_plate_temp": [
+    "60"
+  ],
+  "textured_plate_temp_initial_layer": [
+    "60"
+  ]
+}