- Plug an ethernet Cable into eth0
- Configure your PC/Notebook Ethernet Card to use the IP Address 192.168.1.5/24. Set no default Gateway
- Open a Webbrowser and go to https://192.168.1.1
- Login with the default Credentials: ubnt/ubnt
- Update your Firmware: Click on System (on the bottom left) and scroll down to Upgrade System Image
- Download the latest Image from the Ubiquitis website and upload the image to the Router
Go to the Ubiquiti's Firmware Website and copy the URL
add system image https://dl.ubnt.com/firmwares/edgemax/v1.9.7/ER-e200.v1.9.7.5001803.tar
show system image
reboot
Info: If you restart the device all PoE devices are also restarting
- Change the default Username / Password: Log back in and click on Users. Create a new User (be carefull with uper and lowercase). Logout and Log back in with the newly created User
- Set an default Gateway and default DNS Server: click on System and fill in the blanks :D
If you have an adapter your device will probably be /dev/ttyUSB0. Download putty and use this device. Set the bitrate to 115200
For more information see: How to Connect to Serial Console