Master build

BuildLinux.sh

@@ -224,7 +224,7 @@ then
     then
         BUILD_ARGS="${BUILD_ARGS} -DCMAKE_BUILD_TYPE=Debug -DBBL_INTERNAL_TESTING=1"
     else
-        BUILD_ARGS="${BUILD_ARGS} -DBBL_RELEASE_TO_PUBLIC=1 -DBBL_INTERNAL_TESTING=0"
+        BUILD_ARGS="${BUILD_ARGS} -DBBL_RELEASE_TO_PUBLIC=1 -DBBL_INTERNAL_TESTING=2"
     fi
 
     # cmake

CMakeLists.txt

@@ -538,6 +538,14 @@ foreach(po_file ${BBL_L10N_PO_FILES})
     )
 endforeach()
 
+# copy pt-BR/BamabuStudio.mo to pt_br/
+SET(PT_BR "${L10N_DIR}/pt-BR/BambuStudio.mo")
+SET(PT_BR_DST "${L10N_DIR}/pt_br/")
+add_custom_command(
+    TARGET gettext_po_to_mo POST_BUILD
+    COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PT_BR} ${PT_BR_DST}
+)
+
 find_package(NLopt 1.4 REQUIRED)
 
 

bbl/i18n/BambuStudio.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-22 15:49+0800\n"
+"POT-Creation-Date: 2024-04-07 16:19+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -209,6 +209,15 @@ msgstr ""
 msgid "Error: Please close all toolbar menus first"
 msgstr ""
 
+msgid "Tool-Move"
+msgstr ""
+
+msgid "Tool-Scale"
+msgstr ""
+
+msgid "Tool-Rotate"
+msgstr ""
+
 msgid "Tool-Lay on Face"
 msgstr ""
 
@@ -596,6 +605,10 @@ msgstr ""
 msgid "Measure"
 msgstr ""
 
+msgid ""
+"Please confirm explosion ratio = 1,and please select at least one object"
+msgstr ""
+
 msgid "Edit to scale"
 msgstr ""
 
@@ -623,9 +636,6 @@ msgstr ""
 msgid "Copy to clipboard"
 msgstr ""
 
-msgid "MoveInMeasure"
-msgstr ""
-
 msgid "Angle"
 msgstr ""
 
@@ -641,6 +651,33 @@ msgstr ""
 msgid "Distance XYZ"
 msgstr ""
 
+msgid "Parallel"
+msgstr ""
+
+msgid "Center coincidence"
+msgstr ""
+
+msgid "Featue 1"
+msgstr ""
+
+msgid "Reverse rotation"
+msgstr ""
+
+msgid "Rotate around center:"
+msgstr ""
+
+msgid "Parallel_distance:"
+msgstr ""
+
+msgid "Featue 2"
+msgstr ""
+
+msgid ""
+"Due to ensuer_on_bed, assembly between \n"
+"different objects may not be correct in 3D view.\n"
+" It is recommended to assemble them together."
+msgstr ""
+
 msgid "Brush size"
 msgstr ""
 
@@ -2495,6 +2532,16 @@ msgid ""
 "Reset to 0.2"
 msgstr ""
 
+msgid ""
+"Too small scarf start height.\n"
+"Reset to 50%"
+msgstr ""
+
+msgid ""
+"Too big scarf start height.\n"
+"Reset to 50%"
+msgstr ""
+
 msgid ""
 "Too small ironing spacing.\n"
 "Reset to 0.1"
@@ -2777,6 +2824,10 @@ msgstr ""
 msgid "Parameter validation"
 msgstr ""
 
+#, possible-c-format, possible-boost-format
+msgid "Value %s is out of range. The valid range is from %d to %d."
+msgstr ""
+
 msgid "Value is out of range."
 msgstr ""
 
@@ -2851,10 +2902,10 @@ msgstr ""
 msgid "Flushed"
 msgstr ""
 
-msgid "Total"
+msgid "Tower"
 msgstr ""
 
-msgid "Tower"
+msgid "Total"
 msgstr ""
 
 msgid "Total Estimation"
@@ -2959,6 +3010,12 @@ msgstr ""
 msgid "Normal mode"
 msgstr ""
 
+msgid "Total Filament"
+msgstr ""
+
+msgid "Model Filament"
+msgstr ""
+
 msgid "Prepare time"
 msgstr ""
 
@@ -3926,6 +3983,11 @@ msgstr ""
 msgid "Downloading %d%%..."
 msgstr ""
 
+msgid ""
+"Reconnecting the printer, the operation cannot be completed immediately, "
+"please try again later."
+msgstr ""
+
 msgid ""
 "Over 4 studio/handy are using remote access, you can close some and try "
 "again."
@@ -5103,6 +5165,13 @@ msgstr ""
 msgid "If enabled, auto-calculate every time when the color is changed."
 msgstr ""
 
+msgid ""
+"Flushing volumes: Auto-calculate every time when the filament is changed."
+msgstr ""
+
+msgid "If enabled, auto-calculate every time when filament is changed"
+msgstr ""
+
 msgid "Presets"
 msgstr ""
 
@@ -5915,11 +5984,18 @@ msgstr ""
 msgid "Ignore"
 msgstr ""
 
+msgid ""
+"Experimental feature: Retracting and cutting off the filament at a greater "
+"distance during filament changes to minimize flush.Although it can notably "
+"reduce flush,  it may also elevate the risk of nozzle clogs or other "
+"printing complications."
+msgstr ""
+
 msgid ""
 "Experimental feature: Retracting and cutting off the filament at a greater "
 "distance during filament changes to minimize flush.Although it can notably "
 "reduce flush, it may also elevate the risk of nozzle clogs or other printing "
-"complications."
+"complications.Please use with the latest printer firmware."
 msgstr ""
 
 msgid ""
@@ -6449,8 +6525,8 @@ msgstr ""
 
 msgid ""
 "Studio would re-calculate your flushing volumes everytime the filaments "
-"color changed. You could disable the auto-calculate in Bambu Studio > "
-"Preferences"
+"color changed or filaments changed. You could disable the auto-calculate in "
+"Bambu Studio > Preferences"
 msgstr ""
 
 msgid "Flushing volume (mm³) for each filament pair."
@@ -8169,6 +8245,15 @@ msgid ""
 "printed more slowly"
 msgstr ""
 
+msgid "Precise Z height"
+msgstr ""
+
+msgid ""
+"Enable this to get precise z height of object after slicing. It will get the "
+"precise object height by fine-tuning the layer heights of the last few "
+"layers. Note that this is an experimental parameter."
+msgstr ""
+
 msgid "Arc fitting"
 msgstr ""
 
@@ -8322,6 +8407,15 @@ msgstr ""
 msgid "Speed of internal sparse infill"
 msgstr ""
 
+msgid "Interface shells"
+msgstr ""
+
+msgid ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material"
+msgstr ""
+
 msgid "Maximum width of a segmented region"
 msgstr ""
 
@@ -8797,9 +8891,9 @@ msgstr ""
 msgid ""
 "This option sets the threshold angle for applying a conditional scarf joint "
 "seam.\n"
-"If the maximum angle within the perimeter loop exceeds this value "
-"(indicating the absence of sharp corners), a scarf joint seam will be used. "
-"The default value is 155°."
+"If the seam angle within the perimeter loop exceeds this value (indicating "
+"the absence of sharp corners), a scarf joint seam will be used. The default "
+"value is 155°."
 msgstr ""
 
 msgid "Scarf start height"
@@ -9524,9 +9618,6 @@ msgid ""
 "XY Size compensation can not be combined with color-painting."
 msgstr ""
 
-msgid "Generating supports"
-msgstr ""
-
 msgid ""
 "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
 msgstr ""
@@ -9621,12 +9712,6 @@ msgstr ""
 msgid "Max Volumetric Speed"
 msgstr ""
 
-msgid "Please enter the name you want to save to printer."
-msgstr ""
-
-msgid "The name cannot exceed 40 characters."
-msgstr ""
-
 #, possible-c-format, possible-boost-format
 msgid ""
 "Please input valid values:\n"
@@ -9806,6 +9891,12 @@ msgstr ""
 msgid "Failed"
 msgstr ""
 
+msgid "Please enter the name you want to save to printer."
+msgstr ""
+
+msgid "The name cannot exceed 40 characters."
+msgstr ""
+
 msgid ""
 "Only one of the results with the same name will be saved. Are you sure you "
 "want to override the other results?"
@@ -11034,6 +11125,13 @@ msgid ""
 "higher printing quality, but longer printing time in some printing cases."
 msgstr ""
 
+msgid ""
+"This is neither a commonly used filament, nor one of Bambu filaments, and it "
+"varies a lot from brand to brand. So, it's highly recommended to ask its "
+"vendor for suitable profile before printing and adjust some parameters "
+"according to its performances."
+msgstr ""
+
 #: resources/data/hints.ini: [hint:How to use keyboard shortcuts]
 msgid "How to use keyboard shortcuts\nDid you know that Bambu Studio offers a wide range of keyboard shortcuts and 3D scene operations."
 msgstr ""