hacks-guide · Mar 22, 2025
diff --git a/‎docs/ar_SA/_include/addproxy.md
+2-2 b/‎docs/ar_SA/_include/addproxy.md
+2-2
diff --git a/‎docs/ar_SA/_include/configure-luma3ds.md
+3-3 b/‎docs/ar_SA/_include/configure-luma3ds.md
+3-3
@@ -17,5 +17,5 @@ A visual guide is available for this section [here](/images/screenshots/set-prox
 5. Set the Proxy Server to `ssloth.nintendohomebrew.com`, and the Port to `8080`
 6. Click OK, then click Save
 7. When prompted, click "Test" to perform the connection test
-   - The test should succeed
-8. Click "OK" to continue
+    - The test should succeed
+8. Click "OK" to continue
@@ -1,5 +1,5 @@
 1. Your console should have booted into the Luma3DS configuration menu
-   - Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-   - For the purpose of this guide, **leave these options on the default settings** (do not check or uncheck anything)
-   - If your console shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+    - Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+    - For the purpose of this guide, **leave these options on the default settings** (do not check or uncheck anything)
+    - If your console shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 2. Press (Start) to save and reboot