Migrate hil vm

.github/workflows/build_util.yml

@@ -16,6 +16,10 @@ on:
         required: false
         default: false
         type: boolean
+      upload-artifacts:
+        required: false
+        default: false
+        type: boolean
       os:
         required: false
         type: string
@@ -62,3 +66,17 @@ jobs:
             python tools/build.py -s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ steps.set-one-per-family.outputs.build_option }} ${{ matrix.arg }}
           fi
         shell: bash
+
+      - name: Upload Artifacts for Hardware Testing
+        if: ${{ inputs.upload-artifacts }}
+        uses: actions/upload-artifact@v4
+        with:
+          name: ${{ matrix.arg }}
+          path: |
+            cmake-build/cmake-build-*/*/*/*.elf
+            cmake-build/cmake-build-*/*/*/*.bin
+            cmake-build/cmake-build-*/*/*/*.bin
+            cmake-build/cmake-build-*/*/*/bootloader/bootloader.bin
+            cmake-build/cmake-build-*/*/*/partition_table/partition-table.bin
+            cmake-build/cmake-build-*/*/*/config.env
+            cmake-build/cmake-build-*/*/*/flash_args

.github/workflows/hil_test.yml

@@ -18,7 +18,7 @@ concurrency:
   cancel-in-progress: true
 
 env:
-  HIL_JSON: test/hil/rpi.json
+  HIL_JSON: test/hil/tinyusb.json
 
 jobs:
   set-matrix:
@@ -32,7 +32,10 @@ jobs:
       - name: Generate matrix json
         id: set-matrix-json
         run: |
-          MATRIX_JSON=$(jq -c '{ "arm-gcc": [.boards[] | select(.flasher != "esptool" and .flasher != "openocd_wch") | .name] }' ${{ env.HIL_JSON }})
+          MATRIX_ARMGCC=$(jq -c '{ "arm-gcc": { "family": [.boards[] | select(.flasher != "esptool" and .flasher != "openocd_wch") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}")
+          MATRIX_ESP=$(jq -c '{ "esp-idf": { "family": [.boards[] | select(.flasher == "esptool") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}")
+          MATRIX_RISCV=$(jq -c '{ "riscv-gcc": { "family": [.boards[] | select(.flasher == "openocd_wch") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}")
+          MATRIX_JSON=$(jq -nc --argjson arm "$MATRIX_ARMGCC" --argjson esp "$MATRIX_ESP" --argjson riscv "$MATRIX_RISCV" '$arm + $esp + $riscv')
           echo "matrix=$MATRIX_JSON"
           echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT
 
@@ -42,58 +45,35 @@ jobs:
   build:
     if: github.repository_owner == 'hathach'
     needs: set-matrix
-    runs-on: ubuntu-latest
+    uses: ./.github/workflows/build_util.yml
     strategy:
       fail-fast: false
       matrix:
-        board: ${{ fromJSON(needs.set-matrix.outputs.json)['arm-gcc'] }}
-    steps:
-      - name: Checkout TinyUSB
-        uses: actions/checkout@v4
-
-      - name: Setup arm-gcc toolchain
-        uses: ./.github/actions/setup_toolchain
-        with:
-          toolchain: 'arm-gcc'
-
-      - name: Get Dependencies
-        uses: ./.github/actions/get_deps
-        with:
-          arg: -b${{ matrix.board }}
-
-      - name: Build
-        run: python tools/build.py -b${{ matrix.board }}
-
-      - name: Upload Artifacts for Hardware Testing
-        uses: actions/upload-artifact@v4
-        with:
-          name: ${{ matrix.board }}
-          path: |
-            cmake-build/cmake-build-*/*/*/*.elf
-            cmake-build/cmake-build-*/*/*/*.bin
+        toolchain:
+          - 'arm-gcc'
+          - 'esp-idf'
+    with:
+      build-system: 'cmake'
+      toolchain: ${{ matrix.toolchain }}
+      build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }}
+      one-per-family: true
+      upload-artifacts: true
 
   # ---------------------------------------
   # Hardware in the loop (HIL)
-  # self-hosted running on an RPI. For attached hardware checkout test/hil/rpi.json
+  # self-hosted running on an VM. For attached hardware checkout test/hil/tinyusb.json
   # ---------------------------------------
-  hil-rpi:
+  hil-tinyusb:
     if: github.repository_owner == 'hathach'
     needs: build
-    runs-on: [self-hosted, ARM64, rpi, hardware-in-the-loop]
+    runs-on: [self-hosted, X64, hathach, hardware-in-the-loop]
     steps:
       - name: Clean workspace
         run: |
           echo "Cleaning up previous run"
           rm -rf "${{ github.workspace }}"
           mkdir -p "${{ github.workspace }}"
 
-        # USB bus on rpi is not stable, reset it before testing
-#      - name: Reset USB bus
-#        run: |
-#          echo "1-2" | sudo tee /sys/bus/usb/drivers/usb/unbind
-#          sleep 5
-#          echo "1-2" | sudo tee /sys/bus/usb/drivers/usb/bind
-
       - name: Checkout TinyUSB
         uses: actions/checkout@v4
         with:

test/hil/hil_test.py

@@ -45,6 +45,11 @@
 
 verbose = False
 
+# -------------------------------------------------------------
+# Path
+# -------------------------------------------------------------
+OPENCOD_ADI_PATH = f'{os.getenv("HOME")}/app/openocd_adi'
+
 # get usb serial by id
 def get_serial_dev(id, vendor_str, product_str, ifnum):
     if vendor_str and product_str:
@@ -112,8 +117,8 @@ def read_disk_file(uid, lun, fname):
 # -------------------------------------------------------------
 # Flashing firmware
 # -------------------------------------------------------------
-def run_cmd(cmd):
-    r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+def run_cmd(cmd, cwd=None):
+    r = subprocess.run(cmd, cwd=cwd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
     if r.returncode != 0:
         title = f'COMMAND FAILED: {cmd}'
         print()
@@ -187,11 +192,7 @@ def flash_openocd_wch(board, firmware):
 
 
 def flash_openocd_adi(board, firmware):
-    openocd_adi_script_path = f'{os.getenv("HOME")}/app/openocd_adi/tcl'
-    if not os.path.exists(openocd_adi_script_path):
-        openocd_adi_script_path = '/home/pi/openocd_adi/tcl'
-
-    ret = run_cmd(f'openocd_adi -c "adapter serial {board["flasher_sn"]}" -s {openocd_adi_script_path} '
+    ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl '
                   f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"')
     return ret
 
@@ -203,14 +204,14 @@ def flash_wlink_rs(board, firmware):
 
 def flash_esptool(board, firmware):
     port = get_serial_dev(board["flasher_sn"], None, None, 0)
-    dir = os.path.dirname(f'{firmware}.bin')
-    with open(f'{dir}/config.env') as f:
-        IDF_TARGET = json.load(f)['IDF_TARGET']
-    with open(f'{dir}/flash_args') as f:
+    fw_dir = os.path.dirname(f'{firmware}.bin')
+    with open(f'{fw_dir}/config.env') as f:
+        idf_target = json.load(f)['IDF_TARGET']
+    with open(f'{fw_dir}/flash_args') as f:
         flash_args = f.read().strip().replace('\n', ' ')
-    command = (f'esptool.py --chip {IDF_TARGET} -p {port} {board["flasher_args"]} '
+    command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} '
                f'--before=default_reset --after=hard_reset write_flash {flash_args}')
-    ret = subprocess.run(command, shell=True, cwd=dir, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+    ret = run_cmd(command, cwd=fw_dir)
     return ret
 
 
@@ -305,8 +306,7 @@ def test_device_dfu(board):
     # Wait device enum
     timeout = ENUM_TIMEOUT
     while timeout:
-        ret = subprocess.run(f'dfu-util -l',
-                             shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+        ret = run_cmd(f'dfu-util -l')
         stdout = ret.stdout.decode()
         if f'serial="{uid}"' in stdout and 'Found DFU: [cafe:4000]' in stdout:
             break
@@ -347,8 +347,7 @@ def test_device_dfu_runtime(board):
     # Wait device enum
     timeout = ENUM_TIMEOUT
     while timeout:
-        ret = subprocess.run(f'dfu-util -l',
-                             shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+        ret = run_cmd(f'dfu-util -l')
         stdout = ret.stdout.decode()
         if f'serial="{uid}"' in stdout and 'Found Runtime: [cafe:4000]' in stdout:
             break
@@ -382,17 +381,18 @@ def test_device_hid_composite_freertos(id):
 # -------------------------------------------------------------
 # Main
 # -------------------------------------------------------------
-# all possible tests: board_test is added last to disable board's usb
-all_tests = [
+# device tests
+device_tests = [
     'device/cdc_dual_ports',
     'device/cdc_msc',
     'device/dfu',
     'device/cdc_msc_freertos',  # don't test 2 cdc_msc next to each other
     'device/dfu_runtime',
     'device/hid_boot_interface',
+]
 
+dual_tests = [
     'dual/host_info_to_device_cdc',
-    'device/board_test'
 ]
 
 
@@ -401,17 +401,22 @@ def test_board(board):
     flasher = board['flasher'].lower()
 
     # default to all tests
-    test_list = list(all_tests)
+    test_list = list(device_tests)
 
     if 'tests' in board:
         board_tests = board['tests']
         if 'only' in board_tests:
-            test_list = board_tests['only'] + ['device/board_test']
+            test_list = board_tests['only']
         if 'skip' in board_tests:
             for skip in board_tests['skip']:
                 if skip in test_list:
                     test_list.remove(skip)
                     print(f'{name:25} {skip:30} ... Skip')
+        if 'dual_attached' in board_tests:
+            test_list += dual_tests
+
+    # board_test is added last to disable board's usb
+    test_list.append('device/board_test')
 
     err_count = 0
     for test in test_list:
@@ -422,7 +427,7 @@ def test_board(board):
         print(f'{name:25} {test:30} ... ', end='')
 
         if not os.path.exists(fw_dir):
-            print('Skip')
+            print('Skip (no binary)')
             continue
 
         # flash firmware. It may fail randomly, retry a few times

test/hil/requirements.txt

@@ -0,0 +1,2 @@
+fs
+pyfatfs

test/hil/rpi.json → test/hil/tinyusb.json

@@ -76,6 +76,16 @@
             "flasher": "openocd",
             "flasher_sn": "066FFF495087534867063844",
             "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg"
+        },
+        {
+            "name": "espressif_s3_devkitm",
+            "uid": "84F703C084E4",
+            "tests": {
+                "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"]
+            },
+            "flasher": "esptool",
+            "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1",
+            "flasher_args": "-b 921600"
         }
     ],
     "boards-skip": [
@@ -92,16 +102,6 @@
             "flasher": "openocd_wch",
             "flasher_sn": "EBCA8F0670AF",
             "flasher_args": ""
-        },
-        {
-            "name": "espressif_s3_devkitm",
-            "uid": "84F703C084E4",
-            "tests": {
-                "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"]
-            },
-            "flasher": "esptool",
-            "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1",
-            "flasher_args": "-b 921600"
         }
     ]
 }