Add support for higher capacity battries

[OldMateAidos]

Iam loving this firmware so so much the abilities in this firmware are very impressive , is there anyway to implement feature for higher capacity battries

[losehu]

• fork the code via github

• change gSubMenu_BATTYP in "ui/menu.c"

• change case MENU_BATCAL: *pMin = 1600; *pMax = 2200; break; in app/menu.c

• then rebuild the firmware via github action

[OldMateAidos]

Absolute legend , thank you

[OldMateAidos]

How do I add boot image support instead of boot text , I have managed to implement larger battery , what array do I have to change to allow three battery options in the sub battery menu ?

[losehu]

only "EK" could use boot image,write image in https://k5.vicicode.com/#/idea/Image
as for "three battery options"，This is a bit troublesome. If it's not necessary, two would be enough

[OldMateAidos]

Thank you , trying to implant your auto Doppler shift and SI4732 support into a firmware im working on for just scanning and weather data and sat images data could you give me some guidance?, if I replace eprom do I just have to flash again or further steps need , very thankfull for your help

[losehu]

ok，but how can 4732 used to NOAA
OTHERWISE,Doppler shift may can't do that

[OldMateAidos]

I trying to also add 4732 support as well for higher hf , and use normal VHF for NOAA I use radio to pass audio to PC get weather image , is it not possible to use both ?

[losehu]

In FM mode, the 4732 frequency can only support up to 108MHz. I'm not sure if it's applicable

[OldMateAidos]

Oh ok I did not know that thank for sharing , so I could add Doppler shift but not SI4732? I tried to look in code and found for Doppler but not sure how to add

[losehu]

The frequency calculation of Doppler is entirely done by a computer, and if you are the same, you should be able to do so