Makefile.in

# -*- Mode: Makefile -*-

# Copyright (c)1996, 1997, 1998 The Regents of the University of
# California (Regents). All Rights Reserved. 
#
# Permission to use, copy, modify, and distribute this software and its
# documentation for educational, research, and not-for-profit purposes,
# without fee and without a signed licensing agreement, is hereby
# granted, provided that the above copyright notice, this paragraph and
# the following two paragraphs appear in all copies, modifications, and
# distributions. 
#
# Contact The Office of Technology Licensing, UC Berkeley, 2150 Shattuck
# Avenue, Suite 510, Berkeley, CA 94720-1620, (510) 643-7201, for
# commercial licensing opportunities. 
#
# IN NO EVENT SHALL REGENTS BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
# SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS,
# ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
# REGENTS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
#
# REGENTS SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE.  THE SOFTWARE AND ACCOMPANYING DOCUMENTATION, IF
# ANY, PROVIDED HEREUNDER IS PROVIDED "AS IS". REGENTS HAS NO OBLIGATION
# TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
# MODIFICATIONS. 


# -*- Mode: Makefile -*-

# Makefile.in -- Main Makefile (in 'configure' format) for SHIC
# project.
#
# Autoconf/Configure tag.
# @configure_input@


#==============================================================================
# Standard (GNU form) variable setup

# General Variables

SHELL = /bin/sh


# Installation Variables

prefix      = @prefix@
exec_prefix = @exec_prefix@

bindir      = @bindir@
includedir  = @includedir@
libdir      = @libdir@
libexecdir  = @libexecdir@

mandir      = @mandir@


# Build Variables

top_srcdir  = @top_srcdir@
srcdir      = @srcdir@


# Special directives and variables

# .PHONY works for GNU Make, but not for other Make's.  Therefore we
# also use the dummy target FORCE (see "Application's Targets"section)
# to enforce dependencies.

# .PHONY: include compiler run-time debugger graphic.env ttyonly communications
# .PHONY: include.i compiler.i run-time.i debugger.i
# .PHONY: graphic.env.i ttyonly.i communications.i
# .PHONY: FORCE

# Extra Variables

MAT2SCALARDIR = extra/mat2scalar
SHIFTDOCDIR = extra/shiftdoc
SHIFTTREEDIR = extra/shifttree

# Variables for creating the source distribution

SRC_DISTRIBUTION_FILES = Makefile.in \
                         shift.mk.in \
                         cshift.in \
                         configure \
                         configure.in \
                         config.sub \
                         config.guess \
                         install-sh \
                         shiftDefaults.in \
                         README \
                         INSTALL \
                         RUNNING \
                         COPYRIGHT \
                         COMPILER.README \
                         RELEASE-NOTES \
			 NEWS \
			 ChangeLog


SRC_DISTRIBUTION_DIRS  = compiler \
                         include \
                         run-time \
                         libDebug \
                         libTcl \
                         socket \
                         applications \
                         examples \
                         doc \
                         reference \
			 $(MAT2SCALARDIR)
#			 $(SHIFTDOCDIR) \
#			 $(SHIFTTREEDIR)


SHIFT_TARGETS =	include \
		compiler \
		run-time \
		debugger \
		@CONFIGURATION_TARGET@ \
		mat2scalar
#		shiftdoc \
#		shifttree


INSTALL_TARGETS	=	all \
			include.i \
			compiler.i \
			run-time.i \
			debugger.i \
			@CONFIGURATION_TARGET@.i \
			mat2scalar.i
#			shiftdoc.i \
#			shifttree.i


#==============================================================================
# Standard Targets

all: $(SHIFT_TARGETS)
	@echo "SHIFT Building: compiler and debugger(s) have been built."
	@echo ''


install: $(INSTALL_TARGETS)
	chmod a+x cshift
	cp cshift $(bindir)
	@echo SHIFT Building: executables and libraries installed.


uninstall:
	cd compiler; $(MAKE) uninstall
	cd run-time; $(MAKE) uninstall
	cd libDebug; $(MAKE) uninstall
	cd include; $(MAKE) uninstall
	cd socket; $(MAKE) uninstall
	cd libTcl; $(MAKE) uninstall
	if test -d  $(MAT2SCALARDIR) && test -f $(MAT2SCALARDIR)/Makefile; \
	then \
	  cd $(MAT2SCALARDIR) ; $(MAKE) uninstall; \
	fi
	if test -d  $(SHIFTDOCDIR) && test -f $(SHIFTDOCDIR)/Makefile; \
	then \
	  cd $(SHIFTDOCDIR) ; $(MAKE) uninstall; \
	fi
	if test -d  $(SHIFTTREEDIR) && test -f $(SHIFTTREEDIR)/Makefile; \
	then \
	  cd $(SHIFTTREEDIR) ; $(MAKE) uninstall; \
	fi
	rm -f $(bindir)/cshift


reinstall: clean install
	@echo SHIFT Building: reinstallation complete
	@echo ''


clean:
	cd compiler; $(MAKE) clean
	cd run-time; $(MAKE) clean
	cd libDebug; $(MAKE) clean
	cd include; $(MAKE) clean
	cd socket; $(MAKE) clean
	cd libTcl; $(MAKE) clean
	if test -d  $(MAT2SCALARDIR) && test -f $(MAT2SCALARDIR)/Makefile; \
	then \
	  cd $(MAT2SCALARDIR) ; $(MAKE) clean; \
	fi
	if test -d  $(SHIFTDOCDIR) && test -f $(SHIFTDOCDIR)/Makefile; \
	then \
	  cd $(SHIFTDOCDIR) ; $(MAKE) clean; \
	fi
	if test -d  $(SHIFTTREEDIR) && test -f $(SHIFTTREEDIR)/Makefile; \
	then \
	  cd $(SHIFTTREEDIR) ; $(MAKE) clean; \
	fi
	-rm shic


distclean:
	cd compiler; $(MAKE) distclean
	cd run-time; $(MAKE) distclean
	cd libDebug; $(MAKE) distclean
	cd include; $(MAKE) distclean
	cd socket; $(MAKE) distclean
	cd libTcl; $(MAKE) distclean
	cd reference; $(MAKE) distclean
	if test -d  $(MAT2SCALARDIR) && test -f $(MAT2SCALARDIR)/Makefile; \
	then \
	  cd $(MAT2SCALARDIR); \
	  $(MAKE) clean; \
	fi
	if test -d  $(SHIFTDOCDIR) && test -f $(SHIFTDOCDIR)/Makefile; \
	then \
	  cd $(SHIFTDOCDIR); \
	  $(MAKE) clean; \
	fi
	if test -d  $(SHIFTTREEDIR) && test -f $(SHIFTTREEDIR)/Makefile; \
	then \
	  cd $(SHIFTTREEDIR); \
	  $(MAKE) clean; \
	fi
	-rm shic *.tar.gz *.tar *~ \#*
	if test -d obsolete;      then rm -rf obsolete; fi
	if test -f config.cache;  then rm config.cache; fi
	if test -f config.log;    then rm config.log; fi
	if test -f config.status; then rm config.status; fi


# mostlyclean: # UNUSED


# maintainer-clean: # UNUSED


# TAGS: # UNUSED


# info: # UNUSED


# dvi: # UNUSED


# dist -- The 'dist' target assumes GMAKE.  It should not cause problems
# since it should be really used only locally at PATH.

CWD = $(shell pwd)
CWDNAME = $(notdir $(CWD))

# The SHIFT version.

SV  = $(shell admin/get-shift-version)


# dist -- Note that this is the only place where we actually make the
# reference manual automatically.

dist: distprologue reference.i distclean
	@if test $(MAKE) != gmake; then \
	   echo "'gmake' is needed for the dist target" ; \
	   exit 1; \
	fi
	@echo "Preparing the tar file..."
	if test $(CWDNAME) != shift; then \
	  if test -d ../shift; then \
	    echo "Directory shift already exists."; \
	    echo "Please rename it.  Cannot make distribution without"; \
	    echo "risking to cancel important data."; \
	    exit 1; \
	  fi; \
	  cd ..; ln -s $(CWDNAME) shift; \
	fi
	cd ..; \
	tar cvf SHIFTsrc-$(SV).tar \
	    $(SRC_DISTRIBUTION_FILES:%=shift/%) \
	    $(SRC_DISTRIBUTION_DIRS:%=shift/%)
	gzip ../SHIFTsrc-$(SV).tar
	@echo ''
	@echo SHIFT Distribution: done.
	@echo ''

distprologue:
	@echo
	@echo ======================================================
	@echo Preparing SHIFT Distribution
	@echo Many '(ignore)' messages may be printed out by $(MAKE).
	@echo


# check: # UNUSED


# installcheck: # UNUSED


# installdirs: # UNUSED


#==============================================================================
# Special PATH targets
# These are useless to anybody outside California PATH

bindist: distclean
	@if test -r admin/make-bin-dist ; then admin/make-bin-dist; fi


#==============================================================================
# Application Targets

FORCE:

compiler: FORCE
	cd compiler; touch depend; $(MAKE) make-depend; $(MAKE) hasher; $(MAKE)
compiler.i:
	cd compiler; $(MAKE) install


run-time: FORCE
	cd run-time; touch depend; $(MAKE) make-depend; $(MAKE)
run-time.i:
	cd run-time; $(MAKE) install


debugger: FORCE
	cd libDebug; $(MAKE)
debugger.i: FORCE
	cd libDebug; $(MAKE) install


include: FORCE
	cd include; $(MAKE)
include.i: FORCE
	cd include; $(MAKE) install


communications: FORCE
	cd socket; touch depend; $(MAKE) make-depend; $(MAKE)
communications.i: FORCE
	cd socket; $(MAKE) install


graphic.env: communications
	@echo SHIFT Building: configuration with graphic debugger.
	cd libTcl; $(MAKE)
graphic.env.i: communications.i
	cd libTcl; $(MAKE) install

ttyonly: FORCE
	@echo SHIFT Building: configuration with tty only debugger.
ttyonly.i: FORCE


reference: FORCE
	cd reference; $(MAKE)
reference.i: FORCE
	cd reference; $(MAKE) install


mat2scalar: FORCE
	if test -d  $(MAT2SCALARDIR) && test -f $(MAT2SCALARDIR)/Makefile; \
	then \
	cd $(MAT2SCALARDIR) ; touch depend; $(MAKE) make-depend; $(MAKE); \
	fi
mat2scalar.i: FORCE
	if test -d  $(MAT2SCALARDIR) && test -f $(MAT2SCALARDIR)/Makefile; \
	then \
	cd $(MAT2SCALARDIR) ; $(MAKE) install; \
	fi

shiftdoc: FORCE
	if test -d  $(SHIFTDOCDIR) && test -f $(SHIFTDOCDIR)/Makefile; \
	then \
	cd $(SHIFTDOCDIR) ; touch depend; $(MAKE) make-depend; $(MAKE); \
	fi
shiftdoc.i: FORCE
	if test -d  $(SHIFTDOCDIR) && test -f $(SHIFTDOCDIR)/Makefile; \
	then \
	cd $(SHIFTDOCDIR) ; $(MAKE) install; \
	fi

shifttree: FORCE
	if test -d  $(SHIFTTREEDIR) && test -f $(SHIFTTREEDIR)/Makefile; \
	then \
	cd $(SHIFTTREEDIR) ; touch depend; $(MAKE) make-depend; $(MAKE); \
	fi
shifttree.i: FORCE
	if test -d  $(SHIFTTREEDIR) && test -f $(SHIFTTREEDIR)/Makefile; \
	then \
	cd $(SHIFTTREEDIR) ; $(MAKE) install; \
	fi

# end of file -- Makefile --