updates nozzle-rack-asm docs + staging plate QC

docs/lumen/additional-parts/index.md

@@ -12,7 +12,7 @@ These parts and their respective quantities are as follows:
 - 1x `y-limit-striker`
 - 1x `static-camera-foot`
 - 1x `aux-staging-plate-foot`
-- 1x `nozzle-rack`
+- 1x `nozzle-rack-asm`
 
 ## Work Instructions
 
@@ -84,7 +84,7 @@ These parts and their respective quantities are as follows:
 - Place each `aux-staging-plate-foot` into a <span style="background-color:yellow"> yellow NEEDS QC bin</span> while it awaits inspection
 	![](img/aux-staging-plate-foot-bin.png)
 
-### nozzle-rack
+### nozzle-rack-asm
 
 - Insert 2x `m3-hex-head-bolt` into the left and right outermost slots on `nozzle-rack`
 
@@ -102,9 +102,9 @@ These parts and their respective quantities are as follows:
 
 	<img src="img/image18.jpg" width="60%"/>
 
-- Place the completed `nozzle-rack` into a `2x3-bag` before sealing it shut
+- Place the completed `nozzle-rack` into a `3x4-bag` before sealing it shut to create `nozzle-rack-asm`
 
 	![alt text](img/bag-nozzle-rack-1.JPG)
 	![alt text](img/bag-nozzle-rack-2.JPG)
 
-- Place the completed `nozzle-rack` assemblies in a bin on the packout shelf while they await future use
+- Place the completed `nozzle-rack-asm` assemblies in a bin on the packout shelf while they await future use

docs/lumen/pack-out/index.md

@@ -6,7 +6,7 @@
 	* `y-gantry-left`
 	* `y-gantry-right`
 	* `x-gantry`
-	* `nozzle-rack`
+	* `nozzle-rack-asm`
 	* `getting-started-kit`
 	* `tool-kit-bag`
 	* `feeder-blade-harness-set`
@@ -161,8 +161,8 @@
 
 	![alt text](img/IMG_35.JPG)
 
-### `front-leg-extension` and `nozzle-rack`
-1. Insert `nozzle-rack` into the bottom right pocket
+### `front-leg-extension` and `nozzle-rack-asm`
+1. Insert `nozzle-rack-asm` into the bottom right pocket
 	* Confirm `nozzle-rack` has all its mounting hardware installed by peering through the bag
 
 	![alt text](img/IMG_36.JPG)
@@ -216,6 +216,7 @@ Confirm the `lower-foam-tray` matches the image shown below before continuing:
 		* `bottom-camera-assembly` (with lens cap removed)
 		* 3x `peek-cable-clamp`
 		* `bottom-light-harness` and `bottom-camera-harness` w/propper cable managment
+			* Ensure that the `bottom-camera-harness` was used and NOT the longer `top-cable-harness`
 			* `peek-cable-clamp` usage and rubber-band for securing loose cables
 
 	![alt text](img/IMG_49.JPG)