From 9135a377bbf3a92d8261cf53431cf139453d4019 Mon Sep 17 00:00:00 2001 From: Lucian Chapar <33263520+lucian151@users.noreply.github.com> Date: Thu, 23 Jan 2025 13:13:38 -0500 Subject: [PATCH] updates nozzle-rack-asm docs + staging plate QC --- docs/lumen/additional-parts/index.md | 8 ++++---- docs/lumen/pack-out/index.md | 7 ++++--- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/docs/lumen/additional-parts/index.md b/docs/lumen/additional-parts/index.md index 1e7df987..b7153d3e 100644 --- a/docs/lumen/additional-parts/index.md +++ b/docs/lumen/additional-parts/index.md @@ -12,7 +12,7 @@ These parts and their respective quantities are as follows: - 1x `y-limit-striker` - 1x `static-camera-foot` - 1x `aux-staging-plate-foot` -- 1x `nozzle-rack` +- 1x `nozzle-rack-asm` ## Work Instructions @@ -84,7 +84,7 @@ These parts and their respective quantities are as follows: - Place each `aux-staging-plate-foot` into a yellow NEEDS QC bin while it awaits inspection ![](img/aux-staging-plate-foot-bin.png) -### nozzle-rack +### nozzle-rack-asm - Insert 2x `m3-hex-head-bolt` into the left and right outermost slots on `nozzle-rack` @@ -102,9 +102,9 @@ These parts and their respective quantities are as follows: -- Place the completed `nozzle-rack` into a `2x3-bag` before sealing it shut +- Place the completed `nozzle-rack` into a `3x4-bag` before sealing it shut to create `nozzle-rack-asm` ![alt text](img/bag-nozzle-rack-1.JPG) ![alt text](img/bag-nozzle-rack-2.JPG) -- Place the completed `nozzle-rack` assemblies in a bin on the packout shelf while they await future use +- Place the completed `nozzle-rack-asm` assemblies in a bin on the packout shelf while they await future use diff --git a/docs/lumen/pack-out/index.md b/docs/lumen/pack-out/index.md index 81baefe6..deeb94e7 100644 --- a/docs/lumen/pack-out/index.md +++ b/docs/lumen/pack-out/index.md @@ -6,7 +6,7 @@ * `y-gantry-left` * `y-gantry-right` * `x-gantry` - * `nozzle-rack` + * `nozzle-rack-asm` * `getting-started-kit` * `tool-kit-bag` * `feeder-blade-harness-set` @@ -161,8 +161,8 @@ ![alt text](img/IMG_35.JPG) -### `front-leg-extension` and `nozzle-rack` -1. Insert `nozzle-rack` into the bottom right pocket +### `front-leg-extension` and `nozzle-rack-asm` +1. Insert `nozzle-rack-asm` into the bottom right pocket * Confirm `nozzle-rack` has all its mounting hardware installed by peering through the bag ![alt text](img/IMG_36.JPG) @@ -216,6 +216,7 @@ Confirm the `lower-foam-tray` matches the image shown below before continuing: * `bottom-camera-assembly` (with lens cap removed) * 3x `peek-cable-clamp` * `bottom-light-harness` and `bottom-camera-harness` w/propper cable managment + * Ensure that the `bottom-camera-harness` was used and NOT the longer `top-cable-harness` * `peek-cable-clamp` usage and rubber-band for securing loose cables ![alt text](img/IMG_49.JPG)