Adds check for top-ring-light to x-gantry QC

* `top-ring-light` is present with the wire connector visible
opulo-inc · Feb 20, 2025 · 916a49f · 916a49f
1 parent 18786ff
commit 916a49f
Show file tree

Hide file tree

Showing 2 changed files with 2 additions and 1 deletion.
diff --git a/docs/lumen/pack-out/index.md b/docs/lumen/pack-out/index.md
@@ -88,7 +88,7 @@
 	* `GT2-belt` lays flat and is roughly centered in `alu-extrusion` channel
 	* `GT2-belt` has been correctly tensioned
 	* `x-gantry-toolhead` moves smoothly when actuated back and forth by hand
-
+	* `top-ring-light` is present with the wire connector visible
 	!!!success "If all checks pass, continue onward"
 
 * Package `x-gantry` into `lower-foam-tray`

diff --git a/docs/lumen/x-gantry/index.md b/docs/lumen/x-gantry/index.md
@@ -460,6 +460,7 @@ Inspect the completed `x-gantry` for the following criteria:
 
 * `GT2-belt` has been trimmed to appropriate length (flush on 1 side, 15mm on the other)
 * `Top-light-mount` is attached with two screws
+* `top-ring-light` is present with the wire connector visible
 * Camera lens cap is present
 * The wire connectors on both `NEMA-11-stepper-motor` units face away from each other, sitting adjacent to their respective cable strain relief points
 * Each `nozzle-holder` has been lubricated and fit-tested with a nozzle