From 916a49f657727a7cb43e936d23da2401f53589c2 Mon Sep 17 00:00:00 2001
From: Lucian Chapar <33263520+lucian151@users.noreply.github.com>
Date: Thu, 20 Feb 2025 13:29:15 -0500
Subject: [PATCH] Adds check for top-ring-light to x-gantry QC

* `top-ring-light` is present with the wire connector visible
---
 docs/lumen/pack-out/index.md | 2 +-
 docs/lumen/x-gantry/index.md | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/docs/lumen/pack-out/index.md b/docs/lumen/pack-out/index.md
index deeb94e7..7ea51d09 100644
--- a/docs/lumen/pack-out/index.md
+++ b/docs/lumen/pack-out/index.md
@@ -88,7 +88,7 @@
 	* `GT2-belt` lays flat and is roughly centered in `alu-extrusion` channel
 	* `GT2-belt` has been correctly tensioned
 	* `x-gantry-toolhead` moves smoothly when actuated back and forth by hand
-
+	* `top-ring-light` is present with the wire connector visible
 	!!!success "If all checks pass, continue onward"
 
 * Package `x-gantry` into `lower-foam-tray`
diff --git a/docs/lumen/x-gantry/index.md b/docs/lumen/x-gantry/index.md
index 23fb943a..053e94cc 100644
--- a/docs/lumen/x-gantry/index.md
+++ b/docs/lumen/x-gantry/index.md
@@ -460,6 +460,7 @@ Inspect the completed `x-gantry` for the following criteria:
 
 * `GT2-belt` has been trimmed to appropriate length (flush on 1 side, 15mm on the other)
 * `Top-light-mount` is attached with two screws
+* `top-ring-light` is present with the wire connector visible
 * Camera lens cap is present
 * The wire connectors on both `NEMA-11-stepper-motor` units face away from each other, sitting adjacent to their respective cable strain relief points
 * Each `nozzle-holder` has been lubricated and fit-tested with a nozzle