adds fastener kit instructions

docs/diy-components/fastener-kit/index.md

@@ -0,0 +1,44 @@
+# Fastener Kit
+
+This work instruction is for preparing the Fastener Kit - a bag full of all the hardware needed to assemble a v4 from scratch.
+
+![](img/fastener-kit.webp)
+
+We get a pre-made bag of *most* of the hardware pre-made.
+
+![](img/IMG_1478.JPG)
+
+It needs **six** things added, and **one** thing changed.
+
+## Swap
+
+Hunt down the bag of 4x M3 "square nuts".
+
+![](img/IMG_1476.JPG)
+
+They're weird, and won't work for a LumenPnP build. Toss them, but keep the bag, and replace with 4x normal M3 square nuts. Add back to the main bag.
+
+![](img/IMG_1479.JPG)
+
+![](img/IMG_1480.JPG)
+
+## Add
+
+Prepare the following things, added to small bags with labels, as shown below
+
+- 2x M3x10 thumbscrew (for bottom cam mount)
+- 10x M3x12 self-tapping flat head
+- 10x rubber feed
+- 4x rubber bands
+- 4x nozzle holder o-rings
+- 2x PTFE lube packets
+
+![](img/IMG_1481.JPG)
+
+Add to the main bag.
+
+![](img/IMG_1482.JPG)
+
+Add the label to the bag.
+
+![](img/IMG_1483.JPG)

mkdocs.yml

@@ -104,6 +104,7 @@ nav:
         - LumenPnP Datum Board: diy-components/datum-board-kit/index.md
         - Feeder Part Kit: diy-components/feeder-part-kit/index.md
         - Control Box: diy-components/control-box/index.md
+        - Fastener Kit: diy-components/fastener-kit/index.md
 
   - Operations:
         - Overview: operations/index.md