Merge pull request #2263 from BoxyUwU/rustc-pull2

Rustc pull

examples/rustc-driver-interacting-with-the-ast.rs

@@ -20,7 +20,7 @@ use std::path::Path;
 use std::sync::Arc;
 
 use rustc_ast_pretty::pprust::item_to_string;
-use rustc_driver::{Compilation, run_compiler};
+use rustc_driver::{run_compiler, Compilation};
 use rustc_interface::interface::{Compiler, Config};
 use rustc_middle::ty::TyCtxt;
 
@@ -77,7 +77,7 @@ impl rustc_driver::Callbacks for MyCallbacks {
             let item = hir_krate.item(id);
             // Use pattern-matching to find a specific node inside the main function.
             if let rustc_hir::ItemKind::Fn { body, .. } = item.kind {
-                let expr = &tcx.hir().body(body).value;
+                let expr = &tcx.hir_body(body).value;
                 if let rustc_hir::ExprKind::Block(block, _) = expr.kind {
                     if let rustc_hir::StmtKind::Let(let_stmt) = block.stmts[0].kind {
                         if let Some(expr) = let_stmt.init {

rust-version

@@ -1 +1 @@
-124cc92199ffa924f6b4c7cc819a85b65e0c3984
+4ecd70ddd1039a3954056c1071e40278048476fa

src/SUMMARY.md

@@ -75,6 +75,7 @@
 - [Prologue](./building/bootstrapping/intro.md)
 - [What Bootstrapping does](./building/bootstrapping/what-bootstrapping-does.md)
 - [How Bootstrap does it](./building/bootstrapping/how-bootstrap-does-it.md)
+- [Writing tools in Bootstrap](./building/bootstrapping/writing-tools-in-bootstrap.md)
 - [Debugging bootstrap](./building/bootstrapping/debugging-bootstrap.md)
 
 # High-level Compiler Architecture

src/building/bootstrapping/debugging-bootstrap.md

@@ -115,6 +115,14 @@ $ BOOTSTRAP_TRACING=CONFIG_HANDLING=TRACE ./x build library --stage 1
 
 [tracing-env-filter]: https://docs.rs/tracing-subscriber/0.3.19/tracing_subscriber/filter/struct.EnvFilter.html
 
+##### FIXME(#96176): specific tracing for `compiler()` vs `compiler_for()`
+
+The additional targets `COMPILER` and `COMPILER_FOR` are used to help trace what
+`builder.compiler()` and `builder.compiler_for()` does. They should be removed
+if [#96176][cleanup-compiler-for] is resolved.
+
+[cleanup-compiler-for]: https://github.com/rust-lang/rust/issues/96176
+
 ### Using `tracing` in bootstrap
 
 Both `tracing::*` macros and the `tracing::instrument` proc-macro attribute need to be gated behind `tracing` feature. Examples:
@@ -160,6 +168,14 @@ For `#[instrument]`, it's recommended to:
 - Explicitly pick an instrumentation name via `name = ".."` to distinguish between e.g. `run` of different steps.
 - Take care to not cause diverging behavior via tracing, e.g. building extra things only when tracing infra is enabled.
 
+### Profiling bootstrap
+
+You can use the `COMMAND` tracing target to trace execution of most commands spawned by bootstrap. If you also use the `BOOTSTRAP_PROFILE=1` environment variable, bootstrap will generate a Chrome JSON trace file, which can be visualized in Chrome's `chrome://tracing` page or on https://ui.perfetto.dev.
+
+```bash
+$ BOOTSTRAP_TRACING=COMMAND=trace BOOTSTRAP_PROFILE=1 ./x build library
+```
+
 ### rust-analyzer integration?
 
 Unfortunately, because bootstrap is a `rust-analyzer.linkedProjects`, you can't ask r-a to check/build bootstrap itself with `tracing` feature enabled to get relevant completions, due to lack of support as described in <https://github.com/rust-lang/rust-analyzer/issues/8521>.

src/building/bootstrapping/writing-tools-in-bootstrap.md

@@ -0,0 +1,23 @@
+# Writing tools in Bootstrap
+
+There are three types of tools you can write in bootstrap:
+
+- **`Mode::ToolBootstrap`**
+  Use this for tools that don’t need anything from the in-tree compiler and can run with the stage0 `rustc`.
+  The output is placed in the "stage0-bootstrap-tools" directory. This mode is for general-purpose tools built
+  entirely with the stage0 compiler, including target libraries and only works for stage 0.
+
+- **`Mode::ToolStd`**
+  Use this for tools that rely on the locally built std. The output goes into the "stageN-tools" directory.
+  This mode is rarely used, mainly for `compiletest` which requires `libtest`.
+
+- **`Mode::ToolRustc`**
+  Use this for tools that depend on both the locally built `rustc` and the target `std`. This is more complex than
+  the other modes because the tool must be built with the same compiler used for `rustc` and placed in the "stageN-tools"
+  directory. When you choose `Mode::ToolRustc`, `ToolBuild` implementation takes care of this automatically.
+  If you need to use the builder’s compiler for something specific, you can get it from `ToolBuildResult`, which is
+  returned by the tool's [`Step`].
+
+Regardless of the tool type you must return `ToolBuildResult` from the tool’s [`Step`] implementation and use `ToolBuild` inside it.
+
+[`Step`]: https://doc.rust-lang.org/nightly/nightly-rustc/bootstrap/core/builder/trait.Step.html

src/building/suggested.md

@@ -179,6 +179,16 @@ You can run `./x setup editor` and select `helix`, which will prompt you to
 create `languages.toml` with the recommended configuration for Helix. The
 recommended settings live at [`src/etc/rust_analyzer_helix.toml`].
 
+### Zed
+
+Zed comes with built-in LSP and rust-analyzer support.
+It can be configured through `.zed/settings.json`, as described
+[here](https://zed.dev/docs/configuring-languages). Selecting `zed`
+in `./x setup editor` will prompt you to create a `.zed/settings.json`
+file which will configure Zed with the recommended configuration. The
+recommended `rust-analyzer` settings live
+at [`src/etc/rust_analyzer_zed.json`].
+
 ## Check, check, and check again
 
 When doing simple refactoring, it can be useful to run `./x check`
@@ -406,4 +416,5 @@ load this completion.
 [`src/etc/rust_analyzer_settings.json`]: https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_settings.json
 [`src/etc/rust_analyzer_eglot.el`]: https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_eglot.el
 [`src/etc/rust_analyzer_helix.toml`]: https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_helix.toml
+[`src/etc/rust_analyzer_zed.json`]: https://github.com/rust-lang/rust/blob/master/src/etc/rust_analyzer_zed.json
 [`src/etc/pre-push.sh`]: https://github.com/rust-lang/rust/blob/master/src/etc/pre-push.sh

src/implementing_new_features.md

@@ -9,7 +9,11 @@ smoothly.
 **NOTE: this section is for *language* features, not *library* features,
 which use [a different process].**
 
+See also [the Rust Language Design Team's procedures][lang-propose] for
+proposing changes to the language.
+
 [a different process]: ./stability.md
+[lang-propose]: https://lang-team.rust-lang.org/how_to/propose.html
 
 ## The @rfcbot FCP process
 
@@ -163,9 +167,7 @@ a new unstable feature:
 
 1. Prevent usage of the new feature unless the feature gate is set.
    You can check it in most places in the compiler using the
-   expression `tcx.features().$feature_name` (or
-   `sess.features_untracked().$feature_name` if the
-   tcx is unavailable)
+   expression `tcx.features().$feature_name()`
 
     If the feature gate is not set, you should either maintain
     the pre-feature behavior or raise an error, depending on

src/mir/index.md

@@ -304,9 +304,9 @@ The most important rule for
 this representation is that every value must be uniquely represented. In other
 words: a specific value must only be representable in one specific way. For example: there is only
 one way to represent an array of two integers as a `ValTree`:
-`ValTree::Branch(&[ValTree::Leaf(first_int), ValTree::Leaf(second_int)])`.
+`Branch([Leaf(first_int), Leaf(second_int)])`.
 Even though theoretically a `[u32; 2]` could be encoded in a `u64` and thus just be a
-`ValTree::Leaf(bits_of_two_u32)`, that is not a legal construction of `ValTree`
+`Leaf(bits_of_two_u32)`, that is not a legal construction of `ValTree`
 (and is very complex to do, so it is unlikely anyone is tempted to do so).
 
 These rules also mean that some values are not representable. There can be no `union`s in type

src/parallel-rustc.md

@@ -46,8 +46,6 @@ are implemented differently depending on whether `parallel-compiler` is true.
 
 | data structure                   | parallel                                            | non-parallel |
 | -------------------------------- | --------------------------------------------------- | ------------ |
-| Weak                             | std::sync::Weak                                     | std::rc::Weak |
-| Atomic{Bool}/{Usize}/{U32}/{U64} | std::sync::atomic::Atomic{Bool}/{Usize}/{U32}/{U64} | (std::cell::Cell<bool/usize/u32/u64>) |
 | OnceCell                         | std::sync::OnceLock                                 | std::cell::OnceCell |
 | Lock\<T> | (parking_lot::Mutex\<T>) | (std::cell::RefCell) |
 | RwLock\<T> | (parking_lot::RwLock\<T>) | (std::cell::RefCell) |
@@ -58,7 +56,6 @@ are implemented differently depending on whether `parallel-compiler` is true.
 | WriteGuard | parking_lot::RwLockWriteGuard | std::cell::RefMut |
 | MappedWriteGuard | parking_lot::MappedRwLockWriteGuard | std::cell::RefMut |
 | LockGuard | parking_lot::MutexGuard | std::cell::RefMut |
-| MappedLockGuard | parking_lot::MappedMutexGuard | std::cell::RefMut |
 
 - These thread-safe data structures are interspersed during compilation which
   can cause lock contention resulting in degraded performance as the number of
@@ -173,12 +170,10 @@ Here are some resources that can be used to learn more:
 - [This list of interior mutability in the compiler by nikomatsakis][imlist]
 
 [`rayon`]: https://crates.io/crates/rayon
-[Arc]: https://doc.rust-lang.org/std/sync/struct.Arc.html
 [imlist]: https://github.com/nikomatsakis/rustc-parallelization/blob/master/interior-mutability-list.md
 [irlo0]: https://internals.rust-lang.org/t/parallelizing-rustc-using-rayon/6606
 [irlo1]: https://internals.rust-lang.org/t/help-test-parallel-rustc/11503
 [monomorphization]: backend/monomorph.md
 [parallel-rustdoc]: https://github.com/rust-lang/rust/issues/82741
-[Rc]: https://doc.rust-lang.org/std/rc/struct.Rc.html
 [rustc-rayon]: https://github.com/rust-lang/rustc-rayon
 [tracking]: https://github.com/rust-lang/rust/issues/48685

src/tests/directives.md

@@ -154,6 +154,7 @@ Some examples of `X` in `ignore-X` or `only-X`:
   `ignore-coverage-map`, `ignore-coverage-run`
 - When testing a dist toolchain: `dist`
   - This needs to be enabled with `COMPILETEST_ENABLE_DIST_TESTS=1`
+- The `rustc_abi` of the target: e.g. `rustc_abi-x86_64-sse2`
 
 The following directives will check rustc build settings and target
 settings:
@@ -192,6 +193,8 @@ settings:
   specified atomic widths, e.g. the test with `//@ needs-target-has-atomic: 8,
   16, ptr` will only run if it supports the comma-separated list of atomic
   widths.
+- `needs-dynamic-linking` - ignores if target does not support dynamic linking
+  (which is orthogonal to it being unable to create `dylib` and `cdylib` crate types)
 
 The following directives will check LLVM support: